20 Most Recent NEC VT595 LCD Projector - Page 5 Questions & Answers

the lcd panels are failed Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited

It seems that the lcd panels are failed Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited

menu -setting -reset the lamp timer-enter -enter Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited

Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited

you should turn off the projector first Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited

Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited

1,white spots appeared on screen,means the DMD chip is broken,you need a new DMD chip. we supply the DMD chip and the price is USD200 ( new one) it's life will be 6 years Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited

1,Check the fans ,whether each fan is running,when you turn on the projector 2,if the fans run, then ,check the lamp or lamp ballast Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited

On the laptop there should be function keys that control the display. Look at those and see if it is F4 or F5 and then use the FN key to change the display mode.

Without remote is not possible. Any way try press and hold the power bottom on the projector About 4 seconds while projector is in standby mode . Not sure it will work but you can make a try. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/

http://www.nec-pj.com/dl_data/lt380_manual_e.pdf Scroll to page 107 and read through the various light blinking codes. This will help you figure out exactly what the blinking light error is and what steps are needed to correct it. If you are still having trouble please respond with further information for more in depth troubleshooting. If you need further help, I’m available over the phone at https://www.6ya.com/expert/thomas_e8f475a8655f7b4a

DLP projectors use a light tunnel called an engine. The bulb sends light through this part and the image is gathered from that process. Light engines wear out from heat. I am not able to get any service part info on that machine. You need to contact NEC or replace it.