20 Most Recent Frigidaire FTF2140E 3.5 Cu. Ft. Front Loading Washer - Page 8 Questions & Answers

Sounds like the brushes to me they are on the motor if worn the motor won’t turn

Please tell us what the problem is with your particular washer.

sounds like you need a new timer

Most likely suspension parts related. Maybe a bearing or spider arm.

Check door latch. It may need replacing

Try unplugging for 5 minutes

It is not removeable.

Yes at 22 years old its going to break. Buy new. Tge tub is no longer available for that

Give the drum a spin to see if it's bound up. If no resistance, it could be that the drive belt snapped.

It’s connected to drain pump in bottom of machine. You’ll have to determine what has to be removed to access pump.

Frigidaire Affinity Washer Error Code E41 = Control board thinks the door switch is open. Usually replacing the door switch fixes and clears the error code.

waste water outfall pipe blocked or kinked.......... cheers

yes it can, but no one can tell what parts are needed as they are not there to look at it. best solution is to call for service.

On occasion, the manufacturer will in include paperwork inside of the back. You would have to remove the rear cover or panels.

Any error codes? Drain pump may be blocked.

Sounds like the water pump seal may be leaking.

Does this machine have the 'old style' mechanical control timer unit the you rotate the dial? If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Jason, take a look at this link and follow the steps very carefully. Were insulated golves. How to Fix an LG Front load washer machine that wont spin