20 Most Recent Lenovo IdeaPad Y510 Notebook - Page 9 Questions & Answers

hello


check your video card!!!!


good luck

Have you turn it on?
Use shorcut

Welcome to Fixya

May i know what problem are your referring here?

Your response will be highly appreciated.

Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Shutdown the computer.
Turn it off.
Turn it on, and let it restart.
Click Start
Click Control Panel
Click Mouse

Ensure that the touchpad is "enabled".

Hello vinayspatel
You problem is a lack of drivers for the webcam. You can install the webcam driver that came with your previous windows (I mean Vista). If you don't have the drivers anymore you can downloaded from the link below. After the download is complete, run the driver and and go through the install procedure. I hope it solves your problem and you access to your webcam.
Webcam Drivers

cam inversé

there is problem with *********** board, come to service center to fix it

If you have OEM edition of Vista Business or Vista Ultimate, you can downgrade to Windows XP Professional, including Tablet PC Edition and x64 Edition. Only the OEM editions qualify for a downgrade.
To install a copy of Windows XP Professional with the product key that came with the copy, and then when you hit the activation screen -- which is near the end of the installation process -- select the activate by phone option rather than the online method. You'll likely end up talking with a live rep; tell him that you're downgrading from Vista to XP, and give him the Vista product key. The rep is supposed to walk you through the rest.

Hi

You should be able to get audio driver from here HD audio or look for AC.97 audio

good luck


and you may need winzip if the driver is a zipped driver

http://www.realtek.com/

http://download.cnet.com/3001-2120_4-10788584.html?spi=27cb54dce2183d665a9e2be1296d4580

Hi

You may find what you are looking for on this site

http://consumersupport.lenovo.com/ot/en/warranty/warranty.html


good luck

So here's a quick walk-through of all the methods that I know (if you know any more, please comment) to connect a laptop or PC to your TV:
1. S-Video - This is probably the most common method out there currently because an S-Video cable is cheap as heck and just about every TV under the sun has a S-Video port. You'll have to make sure you laptop is equipped with this port. Remember, there are two types of S-Video cables: 4-pin and 7-pin. Most laptops and PC's are equipped with a 7-pin port, so if your TV only has a 4-pin S-Video port, then this method will not work.
2. VGA - If you have a HDTV, then you will be better off connecting using a VGA cable . It gives much better quality than S-Video and as with S-Video, the cable is very cheap. You usually won't find a VGA port on regular TV's though, so this option is if you have an HDTV.
3. DVI - DVI stands for Digital Visual Interface with "digital" being the key word there. The digital signal will give a higher quality picture than either S-Video or VGA. Of course, your computer will need to have a DVI connection and your TV will need to be an HDTV. This cord is definitely not cheap, it ranges anywhere from $40 to $80.
4. HDMI - Using HDMI will give you the best quality by far. No computers that I know of yet have HDMI ports, but you can get a DVI to HDMI cable to connect it to your HDTV. HDMI is compatible with DVI.
5. Scan Converter Box - This is the last method that I could think of and it involves using a scan converter box, which takes a VGA signal and converts it into S-Video or component video.
Here's a graphic I created with some pictures of the various cables:

Hope this helps someone! If you have any other ideas or suggestions, please feel free to comment!!! Thanks!

Hi. Try deleting the upper and lower filter of your computer located under the registry. Below is the procedure on how to do it.

1. Click Start, and then click All Programs.
2. Click Accessories, and then click Run.
3. Type regedit, and then click OK. Collapse this imageExpand this image If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
4. In the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
5. In the right pane, click UpperFilters.
   
   Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only. If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to step 8.
6. On the Edit menu, click Delete.
7. When you are prompted to confirm the deletion, click Yes.
8. In the right pane, click LowerFilters.
   
   Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you any further. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
9. On the Edit menu, click Delete.
10. When you are prompted to confirm the deletion, click Yes.
11. Exit Registry Editor.
12. Restart the computer.

Hi. Based on lenovo website there are no windows 7 driver yet for your webcam. that is why it is not working when you upgrade the operating system to windows 7. Please click here for the drivers. You may try to use the vista driver system Vista and Windows 7 are almost the same operating system.

All the best! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Hi,
Try to do a windows update. It will find the correct driver. Thanks

You set up the computer/laptop with a dual boot system, then you can select which version of Windows you want to boot up when you start your computer.
For details on setting up a dual boot system, have a look at this WEB site :-
http://apcmag.com/the_definitive_dualbooting_guide_linux_vista_and_xp_stepbystep.htm

hi

you mean the LCD panel was removed and the camera from the panel ?

whoever did that should correct it , don't you think so ?

are you sure it was installed upside down ?

do this -- turn computer on , and turn camera on

press ALT + CTRL and the down arrow
to revers the image press ALT + CTRL and the up arrow


does this help ?

if not get that camera placed the correct way

let me know if this helps

There is not so much that could be done to repair a keyboard. Disassemble the laptop, check the ribbon cable connecting the keyboard to the motherboard. If the ribbon cable is loose, tighten it. If it is tight, replace the keyboard with a new one.

I solved the problem using Fn + Esc key. Hope this will help some.

TRY TO DOWNLOAD THE DRIVER FROM
www.all-drivers.com
orwww.laptop-drivers.com

you can get these sockets from electrical hardware such as Maplins if its moulded into the base then thats a problem but not overcomeable,measure the dimensions of the socket,they buy one and just shack it in,if its a problem,you know cutting ,fileng ,glueing ect.you can probably get it to work,if you try but the pc will virtualy lose its value etc --good luck!

Davey snake!

If the Uninterruptible Power Supply or UPS is not holding its charge, the batteries are getting old and the unit will have to be replaced.