Top 20
Polycom SoundPoint IP 320 SIP IP Phone Questions & Answers
Polycom 501 phone keeps trying to reboot itself.
try to turn off the Polycom device. When you turn it back on, press Setup. from the options, select server then click edit. Then select the item Trivial FTP (that setup depends on your ISP), and type the IP address assigned to your network (example 192.168.90.90) then hit OK. click exit several times then press Save & reboot. If it did not work, let us know...
6/19/2010 9:26:18 PM •
Polycom...
•
1,243 views • 0 helpful votes
What is the default password for Polycom
Default Passwords:
To get into the web interface, the default username/password is "Polycom"/"456" (Note that this does not work with Safari 1.2.2.)
To get into the Admin interface on the hard phone, the password is "456". (Prior to v1.3.1, the web interfaces to the phone uses "Polycom"/"SpIp" as the username/password.)
The "user password" (not used much) defaults to "123".
To reset a lost admin password to default: at phone boot, during the 5 second countdown, push/hold 468* on the phone. Enter the phone's MAC address as the password. This will reset network info but keep peers loaded. Tested on Soundpoint IP 650.
12/22/2009 8:29:05 AM •
Polycom...
•
14,319 views • 10 helpful votes
How do i reset my voice mail password
Voicemail systems are a function of the PBX that the phone is connected to, not the phone itself. If you do not have administrative access to the PBX, there is no way to reset the password from the phone unless you know what the password currently is. What kind of premise PBX or hosted PBX service is the phone connecting to?
12/18/2014 6:57:44 PM •
Polycom...
•
307 views • 0 helpful votes
Set ethernet
Transmission circuit is responsive, however the speaker seems to be defective or the receiver section has failed. This is an internal function whereby the unit requires inspection by a technician to correct the issue at hand.
2/26/2014 5:14:51 PM •
Polycom...
•
92 views • 0 helpful votes
In polycom VVX1500 ip set
Hi,
One-touch speed dial or redial is one feature of this Polycom VVX1500, and as far as I know you cannot create a list on the screen.
3/24/2010 8:21:57 AM •
Polycom...
•
79 views • 1 helpful votes
Polycom IP501 and SPA2102 Router
If you know how eo access your configuration control panel then assign a Static IP address or place that assigned address on the other side of the firewall (DMZ). Steve Medley
11/1/2008 11:45:44 PM •
Polycom...
•
159 views • 0 helpful votes
Como cancelar el winter driver
EnglishIt is a car, and cars are complexbut no car was told , maker, model , and year.we can not guess cars. post the VIN? and all that is knownname a problem what can't your car do right?name symptoms or evidence that is confusing to you.then answers can happen.onlygood luck , finding itand Mucho Gusto.my guess now is this is posted to computer forumand not to CARS !must be some odd traction controls thing'but 10,000 models of cars,
How to resolve your meter when it's on temper mode
Tamper mode means the prepaid meter is in a mode where it does not supply power. Check your meter remote controller (used for recharging units). If it displays a Relay Open symbol, the meter is in tamper mode.
To remove tamper mode requires you contact the distributing company and request a tamper reset token. The tamper reset token is a 20-digit code that clears the meter from tamper mode and restores it to its default state.
My Employer Says They Are Going To Cut My Wages. Can They?
If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired an
employment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut.
They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.
Not finding what you are looking for?