20 Most Recent Nortel Business Series Terminal T7208 - digital phone - Page 2 Questions & Answers

Press feature soft key (first button under display panel) and the 4. In order to cancel call forward press feature key, # key, 4.

There is this thing on Norstar systems called Reply message... this turns on your voicemail light, but there is on messages when you go into the mailbox.

Try this: FEATURE # 6 5
There might be something on you set that will tell you who sent the message, and you can hit the # or press the OK button to cancel this message!

Good Luck.

The CCR tree is probably enabled. Are you using one digit options (press 1 for sales for example)?

1. Press Feature x x 8463 (x x TIME) you should have Password displayed on your telephone.

2. Enter 22742 (BASIC) or 23646 (ADMIN) you now should have Hour on your display.

3. Now press Change and enter the correct hours using the key pad

4. Press NEXT and you should have Minutes displayed on your telephone, now press CHANGE and enter the correct Minutes.

5. Press NEXT and you should have Year displayed on your telephone, now press CHANGE and enter the correct Year.

6. Press NEXT and you should have Month displayed on your telephone, now press CHANGE and enter the correct Month.

7. Press NEXT and you should have Day displayed on your telephone, now press CHANGE and enter the correct Day.

8. Now you will have ---End of List--- displayed on your screen, you can now press Rls or handset down button to come out of programming.

Hi....you need to push "feature" button at the top of the phone, then * * 2-3-6-4-6 (a.d.m.i.n ), then when phone asks for password, press 2-3-6-4-6 again, default, unless someone has programmed a different one. use the template link below, this fits over the row of keys on the right side of phone. push "next" until you get to "date and time", and then with a combination of "show" and "change" you can get to change time . try it and see how it goes. email me at [email protected] with questions. link is good for other commands as well. good luck
http://www.meridian-norstar.com/3_nortel_meridian_norstar_programming.html

well you can go to the nortel site where they have an online service where customers can register and get the help needed here is the link http://support.nortel.com/go/main.jsp?cscat=SELFSERVICE

feature 982

your mailbox number is the last 4 digits of your phone number

most phones use *72 ### ### #### and *73 to disable it.try *72 first listen for prompts, if no prompts and only a dial tone, then *72 followed by the number to forward to. Hope that helps you

Naturally, what a great site and informative postsme few extra thinks about this, I'm really fan of this article.
Decides, I would like to share a ms Office Password Unlocker tool - Office password unlocker, that can helps to recover passwords in case you forgot document password to open or to edit

download pdf and go through it.... (topic called "Your T7208 Telephone", option no. "E")
http://www.1800laphones.com/Nortel_PDF/Nortel_Networks_T7208_phone_manual_programming_meridian_norstar_Version1.pdf

Hi Susie.

If you know, or if you have an idea of the password entered, dial the 981, and try digiting the possible password to access the messages. The default password is 0000.

If that does not work, you will have to access your Vmail using system adminstrators mailbox (code 983).

In administration you can cause more troubles if you do not know what you are doing. If you are not the admin for the phone network, call the company technician.

To Log Into System Administration:
1. Enter Feature 983
2. The display will show "LOG", enter your login password

a. If your company extensions are 2 digits long enter "120000"
b. If your company extensions are 3 digits long enter "1020000"
c. If your company extensions are 4 digits long enter "10020000"

To Reset a Mailbox Password:
1. Log into system administration
2. Select the softkey under "MBOX"
3. Select the softkey under "Chng"
4. Enter the mailbox number you want to reset the password for
5. The display shows "Reset Password"
6. Select the softkey under "RESET"
7. Press the release key
*The new password will be "0000", the system will ask the user to change this the first time they log into their mailbox using this password.

Regards.

there is a place in the managment that "allows redirect" this must be checked