20 Most Recent
Transcend 32GB ExpressCard SSD, MLC 32 GB Hard Drive - Page 2 Questions & Answers
Write - protected message when I connect my
Almost all the time when this occurs the problem is that the "write protect" feature of the memory device has been pushed into the on position.
Check the device and make sure this small mechanical switch/tab has not been moved into the write protect position.
If that isn't the case than it may be a formatting problem with the unit.
Transcend has formatting utility to deal with that. Go to that website at this URL: http://www.transcendusa.com/Support/DLCenter/
enter your unit model number and download the "mFormat" utility. It may ask you for the serial number of your drive. Give it. Format the drive. Several times if the first time doesn't correct the issue. Others with similar problems report it may not work the first time but does by the second or third.
Hope that helps.
Formatting pen drive 64gb
HP USB Disk/Drive Format Utility is a Windows based software
used to format drives to FAT, FAT32 and NTFS partition types.
1. Download this tool:
http://dl.dropbox.com/u/4040651/HPUSBFW_2.2.3_MASTER.exe
2. Format pen drive
(Before removing USB flash drive click on the Safely Remove
Hardware icon and then click on USB flash drive you want to remove)
Pendrive not work
Your pendrive is infected with Autorun.inf virus
to remove this virus install malwarebytes (It is antimalware
software)and scan your whole computer as well as your pendrive when
you scaning finish remove all threats
IF the above method is not work
Try to format in other operating system like windows vista or in
windows 7 because in vista and 7 you can force format your pendrive
Getting message "pls insert disk in drive" on inserting the USB
Hello sir/Madam,
You can recover by doing the following:
go to transcend website and download this software;
(http://www.transcendusa.com/products/online_recovery.asp) and then you have to select repair and save data..
andthen also if you dont get ur full data,you can download Pen driverecovery from many sites(search on google) and recover or else email meat
[email protected] for full software..
Regards
Devesh Golani
[email protected]http://www.lifeproblems.uni.cc/blogs
Pendrive Shows Write Protected
These are the tech specifications of your pen drive which includes write protection micro S/D switch. So search it and make it read and write
USB 1.1 compliant and 2.0 compatible,
True Plug and Play for hot swap function
Maximum Transfer speed of 1.5MB (12M bit) per second at full speed
Powered directly via the USB port.
No external power or battery needed.
Operating Systems Supported: No driver required for Windows Me/2000/XP, Mac OS 9.0 or later, or Linux kernel 2.4 or later.Only Windows 98SE needs the provided drive
Write-Protect Function: Write-protect switch Security Function: Password protection available via supplied software (Windows environment only) Boot-Up
Function: Makes JetFlash a MS-DOS Boot Disk LED: Flashing LED indicates
Data Traffic Specifications : Size: 75mm X 11mm X 25mm (L x W x H)
Weight: 15g Data Retention: Up to 10 years Shock Resistance: 1000G (maximum) Erase Cycles: 1,000,000 times Speed: Read 9.0 Mbyte/s, Write 8.0 Mbyte/s (Max.) Certificate: FCC, CE,
BSMI System Requirements: Win 98/98SE/ME/2000/XP, Linux Kernel 2.4 and above, Mac OS 8.6 or later
Pen drive write protected
I have had the same prob and able to remove the write protected message by just unlocking the hold button. If this doesn't work there is formating software for each USB on the web. One can google and download it for free inorder to formate the USB
Transcend pendrive
you just uninstall that unkown device which you get in device manager and reconnect the pendrive if again it says unknown device then goto update driver and select 2nd option which is advanced in that select don't search for driver i'll select and select the driver which is shown in the list and click next and finish ur pendrive will works
Transcend 4 GB PenDrive
hi...
Transcend Downloads:http://www.transcend.nl/Support/DLCenter/index.asp
Transcent Tech Support:
http://www.transcend.nl/Contact/CuTechsupport.asp
If the dealer is a retailer, he is supposed to give you a refund, or a replacement.
You can email Transcent:
[email protected]In the documentation that came with the device, there must be some warranty policy information.
Transcend USB Flash FAQ:
http://www.transcend.nl/Support/FAQ/index.asp?axn=queryFAQ&srhWhatBU=PBU&Func1No=10&LangNo=0&FldNo=18
thank u rate me!!!
I want to know trancend
trancend servicing center located at jagadish market at abids and chenoy trade centre at secunderabad M.G road parkline
dont forget to rate the sol
Unmount usb
External hard drives are portable storage devices you can use to back up files or transfer content from one computer to another quickly and safely.
While external hard drives vary in design and storage capacity, turning them off properly is ideal because it decreases the chances of damaging or corrupting files.
Whether you are using Windows or Mac OS X, you can safely eject and turn off your external hard drive in minutes.
Safely eject your external hard drive before turning it off if you have connected it to your computer.
To do so, click the "Safely remove hardware" icon on the system tray on the taskbar. T
he hardware window launches.
Click your external hard drive's icon in the hardware window and click the "Stop" button.
You should see the "This device can now be safely removed from your computer" dialog message.
Press the "Power" button to turn off your external hard drive.
Some external hard drives turn off automatically when you safely eject them.
Right-click your external hard drive's icon on the desktop if you are using a Mac, and then click "Eject."
Alternatively, drag your external hard drive's icon from the desktop to the "Trash" bin.
You should no longer see your hard drive on the desktop.
Press the "Power" button to turn off your external hard drive
3/25/2021 11:28:41 AM •
Transcend...
•
Answered
on Mar 25, 2021
Not finding what you are looking for?
