Top 20
Pyramid 4000 Mechanical Time Clock - Page 7 Questions & Answers
How can I turn off shuffle mode in my playlist on alexa?
You can turn off shuffle mode in your playlist on Alexa using the following steps:
- Open the Alexa app on your mobile device.
- Tap on the "More" tab at the bottom of the screen.
- Select "Music & Books" from the list.
- Tap on "Amazon Music" or the music service that you are using.
- Tap on "Playlists" and select the playlist you want to play.
- Tap on the play button to start the playlist.
- While the playlist is playing, tap on the bar at the bottom of the screen to expand the player.
- Tap on the "Shuffle" button to turn it off.
Alternatively, you can say "Alexa, turn off shuffle" while the playlist is playing to turn off the shuffle mode.
How to disassemble mx5020 speaker?
Greetings,
Please check the handbook of your device to see if there are diagrams highlighting the location of the screws for the speakers. Once located, you can start by using a screwdriver to remove those screws and open up the device. Otherwise, you might need to work with an electrician or possibly a pawnshop to help get the device open. Thank you.
Nsm 2000 cd showing error 31,playing but no sound
Error 31 on a NSM 2000 CD jukebox indicates a fault with the amplifier. The fact that it is playing but producing no sound suggests that the amplifier may have failed. It is recommended to consult a professional technician to diagnose and repair the issue.
How to wire a Delta M3 to a Cobra 29 LTD Classic
Wiring a Delta M3 microphone to a Cobra 29 LTD Classic CB radio requires connecting the wires from the microphone to the corresponding pins on the radio's microphone jack. Here are the steps:
- Locate the microphone jack on the front of the Cobra 29 LTD Classic CB radio.
- Examine the Delta M3 microphone's wiring. It should have four wires: a black wire, a red wire, a white wire, and a shield wire.
- Determine the pin configuration of the microphone jack on the Cobra 29 LTD Classic CB radio. The pin configuration is usually printed next to the microphone jack or in the owner's manual.
- Connect the Delta M3's black wire to the pin on the microphone jack that corresponds to the radio's ground connection.
- Connect the Delta M3's red wire to the pin on the microphone jack that corresponds to the radio's positive voltage connection.
- Connect the Delta M3's white wire to the pin on the microphone jack that corresponds to the radio's audio input connection.
- Connect the Delta M3's shield wire to the pin on the microphone jack that corresponds to the radio's shield connection.
- Test the microphone by speaking into it while monitoring the audio output on the Cobra 29 LTD Classic CB radio.
Note: If you are unsure about the wiring or pin configuration, consult the owner's manual for your CB radio or seek assistance from a qualified technician. Improper wiring can damage your radio or microphone, and may result in poor audio quality or no audio at all.
Not finding what you are looking for?
