Frigidaire Gallery GLEFM397DS Electric Kitchen Range - Page 6 - Answered Questions & Fixed issues
Beeping F11 error on Frigidaire
Hi im an appliance tech and i had the same problem its not the EOC other words control board its actually the speed bake swith its stuck in the on position that why you get a stock keypad error code either f1 or f11 replace that switch or disconnect it and im positive that this will solve it .
10/31/2023 8:53:27 PM •
Frigidaire...
•
Answered
on Oct 31, 2023
•
77,295 views
Frigidaire oven FSC88B-4 shows "Err F3 " message. What to do?
F3 - Open/shorted sensor (RTD probe) connection.
Check the temperature sensor and the wires and plugs between the sensor and the EOC are good, replace the temperature sensor (RTD probe). If the sensor and wiring are good, the EOC would need to be replaced.
9/3/2020 6:57:29 PM •
Frigidaire...
•
Answered
on Sep 03, 2020
•
208 views
The broiler quit on my Frigidaire flat 5op stove. Something happened and I got an error code. Now when I turn on bake the broiler comes on. How do I reset it.
Sounds like a problem in the oven control board, something not easy to test. That said, I don't find your model number. It would have been helpful to know the error code, something you didn't supply. You might repost a query with the error code and the model number.
Sometimes a reset can be achieved by simply shutting off a circuit breaker and then closing it again. Or, the bottom panel of an oven might slide out give you access to a plug if the oven is not hardwired to your living quarters. But if the stove comes back to life sporting the same error message, I suspect you are destined to access a repairman or a new stove. Still, you might get some information below. Sorry, without the model number and error code, there is not much more I can determine about this.
If your stove is under warranty, the following may be of assistance.
https://www.repairclinic.com/RepairHelp/Range-Stove-Oven-Repair/13-2--/Frigidaire-Range-Stove-Oven-Troubleshooting
4/2/2020 4:29:39 AM •
Frigidaire...
•
Answered
on Apr 02, 2020
•
125 views
Not finding what you are looking for?