Frigidaire Gallery GLEFM397DS Electric Kitchen Range - Page 5 - Answered Questions & Fixed issues


It is not based on time,. It uses temp sensors. When surface is cool enough it will go out..

Frigidaire... | Answered on Feb 16, 2019 | 52 views


This is going to require a new EOC, which is the control board. I attached a link that may help.

Frigidaire... | Answered on Feb 09, 2019 | 188 views


The first thing we want to do is disconnect all power to the range for 5 minutes. Turn the power back on and test. If that does not work it could be the induction generator or the relay board it would take some electrical testing to figure out which. I hope this was some help.

Frigidaire... | Answered on Feb 09, 2019 | 84 views


Code D81 is usually caused by a power surge of some type. The first thing to try is to unplug or shut off the power to the unit for 5 minutes and try it again.

Frigidaire... | Answered on Feb 09, 2019 | 59 views


WHEN IN DOUBT CALL A PROFESSIONAL REPAIR SERVICE IN MANY CASES WHEN PEOPLE USE THIS FEATURE THEY HAVE TOTAL FAILURE WITHIN A FEW DAYS SEEMS THE EXCESSIVE HEAT MELTS OTHER WIRING BEST TO USE A DRIP PAN TO CONTAIN SPILLS AND DO THE CLEANING THE OLD FASHIONED WAY ,BY HAND AND OVEN CLEANER.

Frigidaire... | Answered on Jan 19, 2019 | 59 views


id try their website.

Frigidaire... | Answered on Jan 12, 2019 | 47 views


Where is the office at to make the oven and smaller

Frigidaire... | Answered on Dec 31, 2018 | 1,193 views


1.Try disconnecting the electricity for 20 seconds, shut off the breaker in the breaker box to the oven. Then restoring it.
2.Try setting the oven into clean and starting it. Wait 30 seconds and cancel clean. Sometimes one of these methods work.
Best to you

Frigidaire... | Answered on Dec 22, 2018 | 65 views


I suggest you lift off the burner ring and ensure there is no foreign matter in the area of the igniter. Observe whether the is a spark when you press the button to light the gas. It is possible that the ignition plug has failed, therefor you will need to purchse a replacement.

Frigidaire... | Answered on Dec 22, 2018 | 73 views


Shorted touchpad. Try unplugging for 5 minutes to see if it will reset

Frigidaire... | Answered on Dec 21, 2018 | 95 views


just started 6 weeks ago and I've gotten 2 check for a total of $2,200...this is the best decision I made in a long time! "Thank you for giving me this extraordinary opportunity to make extra money from home. This extra cash has changed my life in so many ways, thank you!" Visit site:: SalaryHD­­.­­C­­o­­m

Frigidaire... | Answered on Dec 03, 2018 | 45 views


Do not use the self clean, it gets the oven way too hot and the oven won't work while it is cleaning. On our oven we put a piece of black electrical tape over the self clean button and told everyone in the household to not use it ever.

Frigidaire... | Answered on Nov 19, 2018 | 50 views


The most likely cause on an electric range is a bad connection on an element, but this unit is gas. It does have a fan assisted oven and a burned out fan is the most likely reason.

https://www.reliableparts.ca/lookup/110541

Model plgf389aca Frigidaire GAS RANGE Parts

Frigidaire... | Answered on Nov 19, 2018 | 126 views


Check elements and all wiring connections

Frigidaire... | Answered on Nov 09, 2018 | 174 views


There are screens under front of top just above door. Remove those and top should lift up and remove

Frigidaire... | Answered on Nov 09, 2018 | 93 views


tilt out to the partial open hold spot the LIFT the door off the hinges .

Frigidaire... | Answered on Oct 21, 2018 | 72 views



The F31 error code means that the control board detects the oven temperature probe circuit is shorted. If the sensor tests good, then you could have a bad control board or a short in the wiring.

Frigidaire... | Answered on Nov 15, 2018 | 83 views


f14 Looks like a keypad problem.
First remove power for 10 minutes or so and then give it a try. This may reset the board.
If this does nothing.
Disconnect the unit from power, unplug the keypad at the control board and clean the connectors then reconnect it and give it a try.
Use electronics cleaner or isopropyl alcohol and a tooth brush to clean them. Just make sure all the solvent has evaporated before reconnecting.
If the ribbon cable is the type where just the insulation is removed (no connector) the contacts can be cleaned with a pencil eraser. Do not use an ink eraser as iit is too abrasive.
If this does nothing
Check it with a meter as shown in the tech sheet to confirm it is shot.
If it is OK then the problem is probably on the control board itself. __________________

Here is the link to the pdf test sheet mentioned above.
http://manuals.frigidaire.com/prodinfo_pdf/Springfield/316904001.pdf

Frigidaire... | Answered on Oct 09, 2018 | 221 views

Not finding what you are looking for?
Frigidaire Gallery GLEFM397DS Electric Kitchen Range Logo

137 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

184 Answers

Paul Carew

Level 3 Expert

3455 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...