20 Most Recent
Vizio 42 in. LCD TV - Page 8 Questions & Answers
Why does my LCD HDTV go to a blue screen when changing channels
if using a box it may be normal but not nice, I would suspect the set is a bit slow reacting to signal change. I remember some nasty JVC sets that when going up or down a channel the screen would blank for about two seconds and come on, normal since all those had that feature(no channel surfing)>
TV will not turn on
Check for loose contacts in power outlet, RC cable, jack and socket.Look for jammed buttons on remote and/or on control panel of TV.
Television will not turn on
Check for loose contacts in power outlet, RC cable, jack and socket. Look for jammed buttons on remote or on control panel.
Vx42l loses power and wont cut on until unplugged for a while
Good day!!!!That problem is usually cause of faulty capacitors on the power supply board..Just follow this instruction to fix your TV..1. Open the back cover of your TV.2. Look at the power supply board..Its normally connected to the power cord..3. After that,,try to look at the actual image of capacitors if it is bulged on the top so that you can easily determine the bad capacitors..4. After that,,try to replaced the bad capacitors using soldering iron and soldering lead..replaced the capacitors only with the same type ratings and value..5. Some of the capacitors not bulged so its better if have a capacitance meter
Not finding what you are looking for?