20 Most Recent Panasonic Viera TX-32LX70 32 in. LCD TV - Page 9 Questions & Answers

The incomming broadcasting signal cable connector are been standard,since the late 80 til now,why doesn't fit,is a mystries to me.U have cable or satalite dish services wright?Call their customer service,they'll send out a Tv tech. to check it out for u.

Probably a blown fuse inside not too common but most likely culprit, especially if this is a newer TV

Hi you can get the manual to set up the bose to your tv on the link below.

http://www.bose.co.uk/GB/en/images/AM289245_00_Cinemate_ENGvo_tcm6-27482.pdf

Good Luck

The tv power supply board is the cause,have problems.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

That is the sign of failed TFT driving circiuts which is part of the LCD panel assembly flexible PCB. You have to replace the panel. You can try reseating the ribbon cablee between the T-CON baord and the LCD panel to see if it will fix it (I do not believe it will). T-CON board is mounted under the metal shileld and the ribbon cables are VERY DELICATE! so be real careful! Look at the my guides and albums before trying to DIY repair.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on: Please see my basic troubleshooting guide here: http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums http://en.wikipedia.org/wiki/Capacitor_plague Parts: www.shopjimmy.com Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.

If you switch on the tv, look very closely at the screen.
If you see a feint light, then it has a screen driver fault and if it is totally blank, shine a torch at the screen and see if you have display with no back light.
Some times a clue to the fault condition becomes apparent from a test as simple as that and it has just lost its tuning giving no sound as well.
If there is no sound either, then it could be a fault further into the processing and one of the supplies may well be missing. Check for fuseable links in the power supply.
BE AWARE THAT MOST IS LOW VOLTAGE BUT IT STILL USES MAINS VOLTAGE AT THE "LIVE" END! Watch what you touch!!

This tv have power supply problems,take it back to retailer demand an exchange or call Panasonic for a warrenty repair.

The tuner in these sets go bad quite often your best bet will be to have it replaced

How old is your TV?Flat screens should not have a compatibility issue with the recorder,however,for a DVD recorder,you need one either with a digital tuner or a cable wire into cable box into DVD recorder into TV,to create the digital input.That is all I can think of that they may be talking about.Who told you about a compatibility issue?Good luck!

Hi. go to your local appliance store that carries panasonic lcd-tv's. They will have a mounting kit that has the screws you need. J.

The TV may have gone into shutdown mode because it may have sensed overvoltage or overcurrent due to short circuits.
You will have to open it up do some inspection inside the TV.
If you are going to DIY and have proper tools and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

Tries websites like Amazon.com,Ebay.com to buy the correct stand or ask the ventors that question.

Ok ,I see conflicting Tv description here.........If this is a TC-32lx70............this is a LCD flat screen,not crt.
There is a software up grade that you can get by calling the toll free number in your owners book. You will insert a SD card into the tv and it will solve these issues

“Shop” was selected in “Auto Tuning” (p. 12).
Reset settings in “Shipping Condition” (p. 32), then select “Home”
in “Auto Tuning” (p. 12).
You can download the manual here to reference any of the pages if your having an issue. If you still need assistance let me know.
http://www.panasonic.com.au/support/downloads/search_results.cfm
or this link should give you direct download to the manual:
http://panasonic.com.au/content/library/files/F002289.pdf

Thank you,
Lee

Power supply board is dead.Replaced the power supply board will solved this problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Hi,the problem you are experiencing indicates that either the LCD display or the screen IC is bad and needs a replacement,however only a professional is eligible to carry out this replacement.so i'll suggest you contact the nearest TV technician close to you to help you fix it.
Thanks and take care