20 Most Recent
Braun Tassimo TA1200 Espresso Machine - Page 6 Questions & Answers
Braun Aromatic KMM10 stops grinding
Soulds like a thermal overload breaker? I know you should not have to do this . Use an outlet that is not shared with any other item, if one is available and if there is a selector for different grinds see if changing it to a finer grind will help. A couarse gring takes more bean ion each pass and it may be too much load on a single extended grinding. One would think the bigger the bin the better the motor. But try this and if you will, let me know. please
Will not grid. makes a soft grinding noise
The knives in the grinder are probably covered with moisty fine powdered coffee. This needs to be cleaned out. There is a possibility that the knives also needs to be changed. You can of course try some of the grinder cleaning products that`s available on the marked.
Coffee maker water does not heat
unless you have a real expensive coffee maker, it is cheaper to just replace it at this point. chances are the heating element has burned in two.
I have been given a new (free) braun kf 400 coffee maker
This is the download page at Braun for your model:
http://www.service.braun.com/product/search.asp?rg=NA&c=US&l=GB&typ=ui&frmTyp=s&sgrp=s&grp=HH02%3C%7C%3E&s=kf400&subgrp=0
Pick whichever model you have and you can download a copy of the manual.
Broken switch
You can email Customer Service at Braun www.braun.com, give them you model number, and see if they will sell you a switch, but these unit's are made to be throwaway.
I just looked at the unit at Braun's website, and they don't show any replacement parts except for having to do with the caraffe.
I know, it's hard to let go of a perfectly good coffee maker like this, but, it's how the world has become.
Schaerer SCP is not rinsing correctly
Check the Operating Temperature:
Ensure that the machine has reached the correct operating temperature. If it hasn't, the indicator light will be on. Wait until the machine is fully heated before proceeding.
Check for Ongoing Programs:
If a rinse or cleaning program is currently in progress, the cleaning button may be flashing. Wait for any ongoing programs to complete before trying to brew coffee.
Inspect the Brewing Unit:
Make sure the brewing unit is properly seated and not obstructed. The brew group should be in the correct position.
If the brew group overflows, it could be due to a blockage or misalignment. Remove the brew group, clean it thoroughly, and reinsert it properly.
Inspect the Coffee Spout and Drainage Area:
Check the coffee spout for any clogs or blockages. Clean it if necessary.
Examine the drainage area at the bottom of the machine. If water is running away onto the floor, there may be a leak. Inspect the drip tray and other components for leaks or damage.
Refer to the Operating Manual:
Consult the operating instructions manual for your Schaerer Coffee Club machine. If the above do not resolve your issues, you may have to contact Schaerer Services.
Not finding what you are looking for?