20 Most Recent Zebra Symbol Technologies MC909X-G Series Barcode Scanner - Page 3 Questions & Answers

If you want to Automatically send scan to the host then you need to go the Configuration Manager. Go to Scanner, Common, and then you will see Auto Send Scan. Change to 'Yes'. Then upload the termconfig by going to Wavelink Prod. Config and click on Application & Config.

do the following:

click on the mobile companion icon on the menu bar at the bottom. this is the radio icon.

click on options and from the drop down menu, select regulatory. uncheck the box 802.11d and select the country where you are.

save the options.

from the drop down menu again, select the last option called export and click on the export options button. save the default registry file and you are now sorted.

The scanner engine/output can be used only by one application. If a second application is trying to access the scanner, while in use. The error message will come.
Please check if there are more applications running in background. Usual MC9090 applications with scanner drivers are Telnet, Datawedge, Rapid Deployment and custom software.
Exit one of the application or try to exit all of them. Start your scanning application again, no error should appear now.

WHAT SCAN ENGINE DOES THE UNIT HAVE? PLEASE CONTACT ME AT [email protected]

Yes thats correct.

The latest version available is v3.2.4.

You can download it from:-

http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=12743&sliceId=&dialogID=22526211&stateId=0%200%2022522575

If that doesn't work as its session controlled just go to teh main search page

http://support.symbol.com/support/product/softwaredownloads.do

and search for datawedge and then select "Most Recent" to get the latest version.

Hope this helps.
If you need any more help then please do not hesitate to contact us:-
 
[email protected] or TEL 01202 620955
http://www.biastechnology.com/

Hi,
 
I've found this method works best especially on Window Mobile versions, windows CE does not seem to have the problem.

1. Have the battery inserted, 
2. Remove the battery so its at the first stage of removal,
3. Hold down the On/Off button and trigger,
4. Insert the battery, still with On/Off button and trigger held,
5. As soon as the amber light flashes release the On/Off button and trigger.
6. Unit will attempt to cold boot and then warm boot,
7. If it works then it will boot through to the Windows Splash screen or desktop.
8. If it fails and continuously warm boots, remove the battery fully as soon as it cycles a warm boot.
9. The terminal will not switch off at this stage and will completely drain the backup battery and RAM, giving you a complete clean cold boot
10. Leave the battery out fro 20 minutes.
11. Power on and see how far you get. 

If it still fails after this I would suggest a complete re-flash of the system. Please post a follow up question on how to do this.
Hope this helps.
If you need any more help then please do not hesitate to contact us:-
 
[email protected] or TEL 01202 620955
http://www.biastechnology.com/