20 Most Recent SanDisk Sansa MP3 Player - Page 7 Questions & Answers

my ipod conect to the coumputer and carging .but ipod not conect.

First, try a soft reset. Do this by pressing the center button and the up volume button simultaneously and try turning it on. If that does not work for you, you will need to get a micro sd card (it can be a dummy) and insert it into the slot on the side of the mp3 player. If you do not have one, you can use one of the round edges of a paper clip (be careful) to get it to come on. When you put either in, it should come on automatically, but if not, just press the power button. This should work.

First, try a soft reset. Do this by pressing the center button and the up volume button simultaneously and try turning it on. If that does not work for you, you will need to get a micro sd card (it can be a dummy) and insert it into the slot on the side of the mp3 player. If you do not have one, you can use one of the round edges of a paper clip (be careful) to get it to come on. When you put either in, it should come on automatically, but if not, just press the power button. This should work.

If you downloaded the songs onto your player free from a mp3 website, there songs most likely were protected by a liscense which only allows you to listen to the for a certain of time (usually a month) as a trial so you will buy the songs to keep it as long as you like. If you do not wish to purchase the songs from that place you are getting them from, you can either go to another free website without a liscense on their songs and get them there or purchase them from another site you like.

The Sansa Express was only designed to hold up to a 2 GB Micro SD card because that is as much expandable memory it was meant to read. Anything bigger as in your case will cause the player to go slower than normal as it tries to read the card and after a while, it will most likely freeze. If you try it with a 2 GB Micro SD card, it should work.

First, try a soft reset. Do this by pressing the center button and the up volume button simultaneously and try turning it on. If that does not work for you, you will need to get a micro sd card (it can be a dummy) and insert it into the slot on the side of the mp3 player. If you do not have one, you can use one of the round edges of a paper clip (be careful) to get it to come on. When you put either in, it should come on automatically, but if not, just press the power button. This should work.

You may need to get either a memory stick to go in the available spot, or if you do not already have one and do not want to spend any money, get a paper clip and carefully stick it in the slot and it should come automatically.

For some models pressing select and the + volume button for 10 sec resets the device and it is recognized by the pc on connecting. Check ur manual to check the way to reset ur device. You can download the manual from http://www.sandisk.com in case you have misplaced it. Drop me a mail at [email protected] to let me know if the solution worked for you.

Had the same problem and was looking for a fix and came upon this site. Someone suggested pressing vol and select buttons together. That didn't do it but when I tried the menu/power button together with the square select button, the thing came back to life. If this works do post back.

First, try a soft reset. Do this by pressing the center button and the up volume button simultaneously and try turning it on. If that does not work for you, you will need to get a micro sd card (it can be a dummy) and insert it into the slot on the side of the mp3 player. If you do not have one, you can use one of the round edges of a paper clip (be careful) to get it to come on. When you put either in, it should come on automatically, but if not, just press the power button. This should work.

Hold down the select button and the volume + button at the same time. This should reset it.

I used to have the same issue. Get a mini-sd card and put it in the slot. It will reboot it.

Head for computer restore back a few days ..

calll the costumer service for that one!!

First, try a soft reset. Do this by pressing the center button and the up volume button simultaneously and try turning it on. If that does not work for you, you will need to get a micro sd card (it can be a dummy) and insert it into the slot on the side of the mp3 player. If you do not have one, you can use one of the round edges of a paper clip (be careful) to get it to come on. When you put either in, it should come on automatically, but if not, just press the power button. This should work.

Go to Start --> Control Panel --> Printers & Other Hardware --> System --> Hardware --> Device Manager --> Universal Serial Bus Controllers - look to see if there are any yellow exclamation marks next to any of the USB ports. If so, right-click them and select Update Driver. Good luck!

-Tha Mp3 Doctor

To reset your device to the original setting...go under settings in the main menu, select reset and hit yes... Should you have any questions..let me know..
P.S.Please rate accordingly...
Thank You
Computerrep

Please go to Settings (which is the icon with 4 bars & 2 bars are moving up & down)....select Settings to go to submenu, then scroll down until you see FM xxx, then the line above FM xxx should be your language menu.  Select it and it will bring you to the list of the language and you should be able to choose your preferred language again.  Hope this helps

What i would recommend you to do is to uninstall the device and reinstall it back...to uninstall it...assuming that you are running windows xp...click on start, right click on my computer and go to properties..you should have your system properties open then click under hardware then device manager...look for the sansa device..it usually located under portable device..if its not showing there i would recommend you to look for under disk drives and see if its there..right click on the device and click on uninstall...after you unintall it unplug your device from the computer....Then follow this link below to download the porting kit...http://www.microsoft.com/downloads/details.aspx?FamilyId=A2E73160-E862-4F19-BB26-C0CAFE798955&displaylang=en .Then check the mode of yuor device to make sure it sunder MTP not msc...To check the mode go under menu, settings and choose usb mode...After you check the mode open up your windows media player click on tools, options and click under privacy...clear the history and caches...after you finish you can plug the device on the back of the computer not the front then windows should recongnize it and it should work properly..if that doesnt solve the problems upgrade your windows media player to 11 even though you have done that already..and try to reconnect your device..make sure you have it connected on the back USB>>>

And if that doesnt work try to obtain the driver for your sandisk device go to http://www.sandisk.com/DriverDownload/index.asp and find the driver for your device..and then connecct the device on the back of your computer...it should work properly..if you are still having any problems..let me know..i would be more than happy to assist you..
Please rate accordingly
Thank you
Computerrep

my sandisk sansa express just shows the logo then turns off need help