Frigidaire HC8830 / HC8830W / HC8830S Kitchen Hood - Answered Questions & Fixed issues


Due to the cost of parts on this range, I would call an engineer. $310 for the oven control board, $400 for the 2 elements.

The only thing I would suggest is checking the contacts at the back of the back panel. you must have checked the element contacts when you did the continuity test. I have seen contacts get hot and snap off.

https://www.partselect.ca/Models/LGEF3045KFK/Sections/Backguard/?ModelID=6747678&ModelNum=LGEF3045KFK&mfgModelNum=&ManufactureID=4&Selected=BA2790DC09E1C5239A8B7CD13A1069F3169E482E&Position=1&mfg=Frigidaire&Type=Washer&Mark=1

Frigidaire... | Answered on Aug 13, 2019 | 74 views


Dear IFE KIARA,
Warning: If you feel in any way uncomfortable/unsafe performing this test or making this repair, please contact a qualified appliance repair technician.

F13 error is related to the clock. this error can occur when the clock looses communication between the keypad or any of the sensor in the stove, including the heat probe. sometimes resetting the power will fix the problem.
Try disconnecting power to the stove completely and flip the corresponding breaker on and off at the breaker box.
Wait 30 seconds and then turn everything back on.
if the problem persist after power-up, according to Frigidaire suggested corrective action the electronic oven control,also called EOC has to be replaced. Here is a search link from Google for the part in question.

Best of Luck,
JP
https://www.google.com/search?source=hp&ei=fecFXYCMAsKr5wKBm6G4DQ&q=316418735&oq=&gs_l=psy-ab.1.0.35i39l10.0.0..5525...1.0..0.209.209.2-1......0......gws-wiz.....10.8VUU1xaL8qM

Frigidaire... | Answered on Jun 16, 2019 | 66 views


As copied from the manual.

Setting a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for silent operation. Press and hold (start/time) . After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pressed. To return the sound, press and hold (start/time) again for 7 seconds until the control beeps once

NOTE!
The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven is ready.

Frigidaire... | Answered on Jun 05, 2019 | 43 views


Yes, the microwaves will still be contained,however it needs to be replaced. super glue will work if the original parts are broken or lost

Frigidaire... | Answered on Apr 25, 2019 | 47 views


It is not based on time,. It uses temp sensors. When surface is cool enough it will go out..

Frigidaire... | Answered on Feb 16, 2019 | 52 views


This is going to require a new EOC, which is the control board. I attached a link that may help.

Frigidaire... | Answered on Feb 09, 2019 | 188 views


The first thing we want to do is disconnect all power to the range for 5 minutes. Turn the power back on and test. If that does not work it could be the induction generator or the relay board it would take some electrical testing to figure out which. I hope this was some help.

Frigidaire... | Answered on Feb 09, 2019 | 84 views


Code D81 is usually caused by a power surge of some type. The first thing to try is to unplug or shut off the power to the unit for 5 minutes and try it again.

Frigidaire... | Answered on Feb 09, 2019 | 59 views


WHEN IN DOUBT CALL A PROFESSIONAL REPAIR SERVICE IN MANY CASES WHEN PEOPLE USE THIS FEATURE THEY HAVE TOTAL FAILURE WITHIN A FEW DAYS SEEMS THE EXCESSIVE HEAT MELTS OTHER WIRING BEST TO USE A DRIP PAN TO CONTAIN SPILLS AND DO THE CLEANING THE OLD FASHIONED WAY ,BY HAND AND OVEN CLEANER.

Frigidaire... | Answered on Jan 19, 2019 | 59 views


id try their website.

Frigidaire... | Answered on Jan 12, 2019 | 47 views


Where is the office at to make the oven and smaller

Frigidaire... | Answered on Dec 31, 2018 | 1,193 views


1.Try disconnecting the electricity for 20 seconds, shut off the breaker in the breaker box to the oven. Then restoring it.
2.Try setting the oven into clean and starting it. Wait 30 seconds and cancel clean. Sometimes one of these methods work.
Best to you

Frigidaire... | Answered on Dec 22, 2018 | 65 views


I suggest you lift off the burner ring and ensure there is no foreign matter in the area of the igniter. Observe whether the is a spark when you press the button to light the gas. It is possible that the ignition plug has failed, therefor you will need to purchse a replacement.

Frigidaire... | Answered on Dec 22, 2018 | 73 views


Shorted touchpad. Try unplugging for 5 minutes to see if it will reset

Frigidaire... | Answered on Dec 21, 2018 | 95 views


just started 6 weeks ago and I've gotten 2 check for a total of $2,200...this is the best decision I made in a long time! "Thank you for giving me this extraordinary opportunity to make extra money from home. This extra cash has changed my life in so many ways, thank you!" Visit site:: SalaryHD­­.­­C­­o­­m

Frigidaire... | Answered on Dec 03, 2018 | 45 views


Do not use the self clean, it gets the oven way too hot and the oven won't work while it is cleaning. On our oven we put a piece of black electrical tape over the self clean button and told everyone in the household to not use it ever.

Frigidaire... | Answered on Nov 19, 2018 | 50 views

Not finding what you are looking for?
Frigidaire HC8830 / HC8830W / HC8830S Kitchen Hood Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

184 Answers

Paul Carew

Level 3 Expert

3455 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...