20 Most Recent Frigidaire HC8830 / HC8830W / HC8830S Kitchen Hood - Page 6 Questions & Answers


The F31 error code indicates a shorted oven temperature sensor probe or a shorted sensor circuit. The normal troubleshooting for this type of failure involves unplugging the range and checking the resistance of the oven temperature sensor probe using a volt/ohm meter. The normal resistance of this probe at room temperature is about 1100 ohms. If the sensor measures less than 500 ohms, it will need to be replaced. If the sensor appears to be okay, you can check the wiring (with the range still unplugged) between the probe and the ERC (Electronic Range Control board). A wiring failure could also cause this problem. NOTE: You should only access and check internal range components if you are completely confident in your technical ability to safely perform the process. Internal metal edges in the range can be sharp. Protective gloves are recommended.

If you are not able to find a problem with the probe or the wiring, then you could have a failed electronic range control (ERC) board. Replacing the temperature probe may fix this problem if the wiring is okay. If you replace the probe and still have a problem, then it is likely that the ERC control board will need to be replaced.

Frigidaire... | Answered on Nov 26, 2017


Hello friend, thank you for your inquiry!

From the information you have provided you are experiencing black soot on your Frigidaire stove top. This could be items from your pan or pot falling and being burnt by the elements. You may also want to inspect the area around the stove to assure nothing is falling onto the elements. If you need further assistance please comment back and I would be happy to help you. -Matt

Frigidaire... | Answered on Nov 14, 2017


Door will have to be completely disassembled which can be challenging. I would suggest looking up a help video in that for your model

Frigidaire... | Answered on Nov 11, 2017


You most likely only have 110 volts going to unit. It takes 220 for everything to work.

Frigidaire... | Answered on Oct 11, 2017


Replace the timer display panel and find out why it went wrong in the first place.

Frigidaire... | Answered on Oct 09, 2017


If you are talking about oven bake and broil elements, the board is most likely the problem if both elements test good

Frigidaire... | Answered on Sep 28, 2017


Did you try to reset the electronics to factory defaults? If still no results you can always disconnect the wires going to the "runaway" burner after killing power and insulating the loose wires.

May need a controller board for device.

Sears Online In Store Shopping Appliances Clothing More

Frigidaire... | Answered on Sep 22, 2017


Hello Ricky Smith,

Look to your Hot Surface IGNITER...
Probably part number 5303935066

eBay example (you must verify your numbers YOURSELF.
http://www.appliancepartspros.com/frigidaire-oven-igniter-5303935066-ap2150412.html

Prices vary wildly... but (in my opinion)
the quality of all these units are COMPARABLE.

Important to look (particularly at your connector)

Watch the INCLUDED video guide (here)
http://www.appliancepartspros.com/frigidaire-oven-igniter-5303935066-ap2150412.html

For your entertainment... also using AMAZON as a part source:
Amazon com 5303935066

Hope this helps

Carnac the Magnificent

Frigidaire... | Answered on Sep 14, 2017

Not finding what you are looking for?
Frigidaire HC8830 / HC8830W / HC8830S Kitchen Hood Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

184 Answers

Paul Carew

Level 3 Expert

3455 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Frigidaire Kitchen Ranges

  • Frigidaire Kitchen Ranges

Most Popular Question

frigidaire stove pf code came right

  • Kitchen Ranges
Loading...