Top 20
Lenovo 3000 J Series 1.80G VBE PC Desktop Questions & Answers
Lenovo 3000 j series was working fine then looked at screen and it was all squiggle lines and computer seemed froze. i manually turned it off and waited. i then turned it back on and there is no video
First, is the computer coming on, do you hear the boot up beeps and sounds. if that is happening, try another monitor, if that works, buy a new one, if that does not work, repalce the video card. if none of that works, take the machine to a local shop for analisis. This might remotely be caused by a virus, but if you are using a good virus protection, it should have caught it.
Computer freezes
First of all, if you have two ram modules, try removing one of them. If you have only one, use memtest86, it can test ram for failures. It looks like ram failure to me. But it could be also a hdd problem, try listening for strange sound.
I'm not getting any power to my lenovo 3000 j series desktop.
Hello, please try the following:1. First is to check your power supply. Try to look if the power supply is functioning, if the fan turns so it is okay.2. Try to remove the CMOS battery and put the cmos jumper setting to reset mode.3. Remove the Memory card.4. Plug your Computer and standby it for about 3 minutes.5. Return all the devices that you remove.6. Switch back to normal the CMOS.7. Turn on your computer and your done.Hope it will help you.
My Lenovo 3000J desktop has
this beep is possibly telling you your hard drive is having an issue.
the boot sector is probably gone and you will need to format the drive, or buy a new one and install it.
Please give detailed information as to your issue to better assist you in your resolution of the problem you are having.The more information given will help determine the resolution and guide you to the proper fix for your issue.
Thank you.
Shuts down when pluging in
Welcome to Fixya
If you did not perform any hardware modification inside the computer then its gonna be sdomething is shorting the front phone jack and the board. You may need to open up the tower and check the wires connecting the fronta panel going to the board.
Thank you for using Fixya!
If you need further help, reach me via phone at
https://www.6ya.com/expert/elixirjose_00375ea24bd8141b
Does my pc have to
No, you can run it with a Linux Live -CD just fine, but without it it will run extremely slow and without any way to save files.
I have a Lenovo 3000
Your motherboard has an AGP 8x video card slot and the nVidia P162 is AGP so it will fit
Will not boot...will power up
UNPLUG COMPUTER PUSH THE ON BUTTON TO DRAIN ANY POWER OPEN THE CASE TOWER AND REMOVE THE CMOS BATTERY AND MEMORY FROM THE BOARD AND LET SIT FOR 5MIN OR SO..PUT BACK TOGETHER CHECK FOR ANY LOOSE CONNECTIONS ON THE BOARD AND DRIVES AND TRY TO BOOT....IF STILL NOTHING REMOVE DRIVE WITH O/S AND CONNECT IT TO ANOTHER COMPUTER AS A 2ND DRIVE AND RUN VIRUS SCANS MAYBE AD-AWARE OR EVEN A REG CLEANER. SPECIFY THAT YOU WANT TO SCAN THE 2ND DRIVE...WHEN SCANS HAVE FINISHED PUT BACK IN FIRST COMPUTER AND SEE IF IT WILL BOOT...CONTACT ME HERE IF YOU NEED TO CHAT ABOUT ANY QUESTIONS THANKS JOE
Print spooler file is missing and I cannot find my
Welcome to Fixya
You must have the windows operating disk to reinstall the print spooler. You may order the disk to lenovo. Here's the contact number 18774536685 then press option 3. Once you have the disk, here's the procedure on how to install the print spooler service.
-
Log on to your PC computer with an administrator account.
-
Open the "Start" menu and click on the "Run" button.
-
Type "sfc /scannow" into the text box and hit "Enter" on your keyboard. The system files scanner will launch and will begin searching for missing configuration files, including the Print Spooler.
-
Put the Windows installation CD into your disk drive when prompted. The computer will copy the Print Spooler files from the CD and restore them to the proper location in the operating system.
Thank you for using Fixya! If you need further help, reach me via phone at
https://www.6ya.com/expert/elixirjose_00375ea24bd8141b
My Lenovo 3000 J Series switches itself off at
the problem of power off after startup can be caused by:
- a Faulty ATX power supply (the power good signal was not prperly generated to the motherboad)
- Cpu fan problem, the CPU temperature is abnormal
- faulty motherboard
to solve this problem, first change your ATX power supply unit with the same power rate.
then clean the radiator and the fan. if the problem still not solved change your motherboad.
Not finding what you are looking for?