20 Most Recent Lenovo 3000 J Series 1.80G VBE PC Desktop - Page 2 Questions & Answers

UNPLUG COMPUTER PUSH THE ON BUTTON TO DRAIN ANY POWER OPEN THE CASE TOWER AND REMOVE THE CMOS BATTERY AND MEMORY FROM THE BOARD AND LET SIT FOR 5MIN OR SO..PUT BACK TOGETHER CHECK FOR ANY LOOSE CONNECTIONS ON THE BOARD AND DRIVES AND TRY TO BOOT....IF STILL NOTHING REMOVE DRIVE WITH O/S AND CONNECT IT TO ANOTHER COMPUTER AS A 2ND DRIVE AND RUN VIRUS SCANS MAYBE AD-AWARE OR EVEN A REG CLEANER. SPECIFY THAT YOU WANT TO SCAN THE 2ND DRIVE...WHEN SCANS HAVE FINISHED PUT BACK IN FIRST COMPUTER AND SEE IF IT WILL BOOT...CONTACT ME HERE IF YOU NEED TO CHAT ABOUT ANY QUESTIONS THANKS JOE

Welcome to Fixya

You must have the windows operating disk to reinstall the print spooler. You may order the disk to lenovo. Here's the contact number 18774536685 then press option 3. Once you have the disk, here's the procedure on how to install the print spooler service.

1. Log on to your PC computer with an administrator account.
   
2. Open the "Start" menu and click on the "Run" button.
   
3. Type "sfc /scannow" into the text box and hit "Enter" on your keyboard. The system files scanner will launch and will begin searching for missing configuration files, including the Print Spooler.
   
4. Put the Windows installation CD into your disk drive when prompted. The computer will copy the Print Spooler files from the CD and restore them to the proper location in the operating system.
   

Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Shift it back with your monitor buttons

check network connection setting, is there a right setting?
check fire wall setting, maybe it limited by your fire wall setting
the last chance is reinstall your pc, it must fix at all

Using Windows XP: Go to Start/Control Panel/Switch to classic view/Internet Options you will see an address bar where you home page is simply type in the specific website.
Using Windows 7/Vista Go to Start/Control Panel/Internet Options/ and change website shown.

Follow this link http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68015 I believe this will solve your problem. Goodluck.

Here's all the driver for your machine. Free

http://www-307.ibm.com/pc/support/site.wss/MIGR-66153.html

the problem of power off after startup can be caused by:

1. a Faulty ATX power supply (the power good signal was not prperly generated to the motherboad)
2. Cpu fan problem, the CPU temperature is abnormal
3. faulty motherboard

to solve this problem, first change your ATX power supply unit with the same power rate. then clean the radiator and the fan. if the problem still not solved change your motherboad.

If it just keeps loading the operating screen, eg: Windows. It shows that either it is not able to cope with the load that it is given or it has been corrupted.

Open the side panel and disconnect the Hard drive, now turn on.

It should come up with a sign saying, Primary disk failure.
Does it stay stable on this screen for a while, longer than 10 minutes?

Now connect the Hard drive.

You may need to either repair windows or reinstall windows on your computer.

Remember to back up your important information as it will be lost if you reinstall windows.

damnor01

Check if the cable that goes from the back of the monitor to the back of the CPU is connected well at the back of both the CPU and the monitor.

Check and correct, if problem persist, reply.

Thanks.

HI,
Can you tell me if the hard disk runs?

Hi,
I have had this problem before. If you recently installed another operating system on your computer and you did not back up your audio driver then you must not have one for the operating system you are currently running. For the Lenovo 3000 J series PC desktop you should have the ADI Soundmax audio driver for windows XP. The solution is to download the driver and then install it on your computer. Restart and then it should work. To download the drivers: Visit the Lenovo website Go to support Find your product Go to downloads and drivers Download the ADI soundmax audio driver
Good Luck

Welcome to Fixya

Can you still boot the computer to safe mode? Try booting the computer to safe mode by pressing F8 key the moment your turn on the computter. Download this file to a different computer and save it to a flash drive. Once you are done downloading this file to the flash drive, insert the flash drive to you lenovo computer then copy the file to C:\windows\system32. Restart the computer after copying the file and you are go to go.

Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Your system should be able to run Windows 7 as is. However, if you decide to go this route I would upgrade your ram to the 2gb max at the very least.

To tell you the truth, however, I personally would recommend just buying a new machine as opposed to upgrading. By the time you add up the money that you would spend on new ram/video card/hard drive to make the upgrade worthwhile you would be spending more than what a low end desktop would cost ya at Best Buy. Not only would the price be equivalent... but you would have way better specs, a new machine, and a warranty to go with it.

Try booting to "safe mode" by pressing F8 as the computer starts till you see the menu. then often you can sign in as Administrator with a blank password. and make new profiles ect. (sometimes it works, worth a shot anyway), depends on how things have been setup. Also just try a blank for password, that is often overlooked aswell. cheers. System restore is initallized by watching for the F key to press when the system initiallizes. commonly F1-F2 F10 or F12

do a online search

This one will fit your system perfectly
http://www.newegg.com/Product/Product.aspx?Item=N82E16814161308

Try the cd in another computer to see if you can boot from that one using the cd - if you can then the cd is probably o.k.
Also I've had this problem when the boot disk has turned out to be a dvd and not a cd at all and when the boot sequence takes place - because it is a dvd then it doesn't recognise it and goes straight to the hard disk.