Top 20
Casio Parts Cash Register PC Desktop Questions & Answers
IBM Toshiba SurePOS 4852-580 15 , cash register.
If an IBM Toshiba SurePOS 4852-580 15 cash register that you purchased used is not allowing you to make any changes and says "unauthorized," there could be a few possible causes:
- The cash register may be locked by a previous owner: The cash register may have been locked by the previous owner with a supervisor password. You will need to obtain the password to make changes.
- The software may be outdated: The software may be out of date and require an update. You will need to contact IBM for assistance with this.
- The system may have been tampered with: The cash register may have been tampered with, which could have caused the system to become locked and require a service technician to reset it.
- The cash register may have a security feature enabled: Some IBM Toshiba SurePOS have a security feature that allows only authorized users to make changes. You will need to contact IBM for assistance with this.
- The cash register may have an issue on the hardware: some issue on the hardware of the device could be preventing the device from functioning properly.
Have tried everything to get rid of E01 but nothing works ..!PCR-T290
You turned the key before you finished in another mode. The register is telling you to go back and finish what you started. For those of you with this problem, turn the key until you find a mode that doesn't give the error. This is the mode that you started working in but didn't finish. Now press subtotal. now press cash. You will have finished anything you started so now you can turn the key. you're welcome.
Cash register casio tk 2300 not opening
If you can finish a sale but the drawer does not open, check the wires that come from the bottom of the register to the drawer. If one has broken or the plug has disconnected from the drawer, it will not open.
How to reset factory settings for a CASIO SES400?
this is work with me
the PGM key at Off press and hold down the Feed (journal) button, while holding the Feed button turn the PGM key down to the PGM mode Release the Feed Button ----INI should appear or a group of 8 zeros, now press
23000 Subtotal (PCRT2100, 220S )
Wait for a receipt to print.
If resetting does not work this indicates issue is repair level.
What does a error four mean?
It means the machine is trying to erase all programming and start from scratch. Make sure the machine has not been turned off for too long and try a flag clear in your manual. If you have lost the manual, most casio manuals are here:
https://the-checkout-tech.com/
Reset casio se300s
Is it working with a card? Can you erase the memory of past operations?
Not finding what you are looking for?