20 Most Recent HP Deskjet F4180 All-in-One InkJet Printer Questions & Answers

First go to the following HP Support link and DOWNLOAD the up to date drivers for your operating system

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3177566&lc=en&cc=uk&dlc=en&lang=en&cc=uk

Next you will need to close all programs on your PC. Also then disconnect from the internet to protect your PC during the next stage of this process. Then disable all Anti Virus, All Anti Malware and All Anti Spyware software. Then run the install application and follow the instructions carefully. This should be successful as it is known that many background programs / apps interfere with the install process. Then try printing and then reboot the PC and try printing again.

Check the power cable
Connect the HP Deskjet F4140 All-in-One directly to the walloutlet

Power Cycle:
Follow the steps below to power cycle your all-in-one:

1. Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One and also disconnect power cable from All-in-One and also from wall outlet.
2. Wait 30 seconds.
3. Plug in the power cable to All-in-One and also to wall outlet.
4. Check for the functionality

Reset the All-in-One:

1. Press and hold the Cancel button and then press the Start Copy Color button.
2. Release both buttons. The self-test page prints.

Now check the functionality

light blinking problemplease help

take out the cartridge and then replace back.

change the pick up rollers

Hi Guys,
Please check the following link and its the same for Deskjet F4180
HP Deskjet F4210 and F4213 All-in-One Printers - Blinking Lights- c01632938

HP Deskjet F4200 All-in-One Series - Blinking Lights - c01365789

Thank You