20 Most Recent
Canon PIXMA MP470 All-in-One Printer - Page 9 Questions & Answers
My printer is printing blank pages. The test print
Mostly, printer cartridge error occurs when the printer head is unable to identify the cartridge properly. And the basic reason behind this is that the cartridge is improperly attached. To reattach the cartridge, turn on the lid of the printer and then remove the cartridge from the printer head. Check the cartridge to make sure that there are no scratches or other damaged parts that can contribute to a printer cartridge error report. Take note that the cartridge should not be left open for more than 30 minutes; otherwise the ink will start to dry up and the cartridge will get clogged.
How to scan a two
Hello. The only way to do this is to scan one side and then manually turn the document over and scan the other side. Joe
4 thumbs up please. ty.
I do not have my
Yes you can install this printer by downloading the printer software from this link and use that , just click
HERE and proceed with the download.
I have an error code 5100. It started grabbing the
This error message is displayed by the printer when paper is jammed in one or more locations. In such a case, users are recommended to remove the jammed paper from the specified location. The entire paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor lever.
Print head is not installed. Install the print
The print heads nowadays are on the ink cartridge itself, check to make sure that A) there is ink cartridges and B) they are properly inserted.
Failing that take the power out for 2 mins and try again, I'm sure its a loose cartridge though :)
I have a Cannon MP4350d.
if you are only having a problem when printing an emails, most likely the setting in your email client (browser in the case you are using an online web-client).
check your OUTLOOK or the browser's printing settings
I own a canon pixma
Hi,
You can download the software from manufacturer's support website by clicking this
link
On the page which opens,
select the operating system of your computer (Windows XP/ Vista..) from the drop-down menu (
See attached image).
Then download the required drivers and software.
The list of available software and drivers will load only after selecting the operating system of the computer.
Hope this solves your problem. Thanks for using
FixYa.
Have error code 5100 can not find my manual.
Follow these steps to fix your problem :
•1
Open the top of the printer.
•2
Locate the waste ink absorber pad on the right side of the inside of the printer. Grasp the pad and pull up to remove.
•3
Clean the waste ink absorber compartment with a tissue or cloth.
•4
Take the waste ink absorber pad to a sink. Run warm water over the pad and wring it out to clean it. Wring the excess water out when done cleaning.
•5
Set the waste ink absorber pad on a dry paper towel or clean cloth to dry.
•6
When the pad is dry, place it back into it's compartment in the printer.
•7
Close the top of the printer.
•8
Press and hold the "Resume" button on the printer. Press and hold the "Power" button while holding down "Resume."
•9
Release the "Resume" button. Press "Resume" twice. The indicator light will turn amber followed by green.
•10
Release the "Power" button.
•11
Press the "Resume" button four times.
•12
Press the "Power" button. The error code is now reset.
Not finding what you are looking for?