20 Most Recent
Canon MX300 Office All-In-One Printer - Page 3 Questions & Answers
My canon mx300 will not turn on
This may sound silly, but make sure your cables are fully connected to the printer and your power cable is plugged in to the electrical outlet. Once, I received a phone call from a friend who was messing around with her printer for over an hour. She couldn't get it to power on. I went over to her house and immediately plugged it in... voila! It worked. ;)
The printer was working great,I
Hi! My name is Mace and I'm here to help.
There is a work around for refilled cartridges to get recognized by the printer again.
What you need to do is to Press and Hold down the STOP/RESET button (the button with and inverted triangle enclosed with a circle) for at least 5 seconds and just wait for the printer to self-restart and initialize.
After that printer will work again.
Low on ink will keeps on prompting but don't worry you will be able to use this printer.
I hope this is the best answer for your question. Feel free to post any question so I can be of further help.
Thank you for using Fixya.
5200 error
If you know more about these error codes, check the site linked here. If is not practical to include all the details here by this window.
http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the
brand name and model number to of your set, to its search box, and press '
Enter'
or view it in
Mosaic / Timeslide option.
Printer problem
The printer hardware should even this out when printing. You should also ensure the paper meets the automatic feeder requirements of the printer. If printing is skewed, feeding multiple pages or jamming, please follow these instructions (use a regular letter size paper to test after doing the steps given below): Please check to ensure there is nothing obstructing the paper feed mechanism down inside the printer where it is not easily seen. If there is nothing obvious, unplug the printer and remove the paper. Open the front cover and look above the steel rod. You should see a conveyor belt with rubber teeth on it, like a fan belt. Take the bottom part of that belt and move it gently to the left. The cartridges should come out with it. Make sure the cartridges can move fully from one side of the printer to the other. Check also the output rollers on the bottom of the printer for any blockage. If it is jamming under the carrier assembly, you may be able to fix it using the manual feed slot. Turn the printer off. Next take a #10 envelope and feed it through the left side of the paper feed slot (The manual paper feed slot is preferred, but the automatic feed will do if there is no manual paper feed for this printer) until it comes completely through the printer to the back of the exit rollers. Move it up and down and slowly move it over to the right side. If something is stuck under the black guide plate this may work it loose or you may have to feed the envelope through the front rollers and push your way backward (please be careful here). Next, take a damp warm cloth and clean the rubber rollers in the automatic sheet feeder. Dust may be coating the rollers there and as they become less tacky, they cannot feed paper correctly. Finally, turn the printer upside down and carefully shake it for 10 to 20 seconds to see if something falls out of the paper feed path. Then plug the printer back up, take your paper out and replace it with a fresh, small stack (about 5 pages) of paper. Quickly bend the stack in an 'S' shape a few times to separate pages. Make sure it is lined up on the right side of the paper feed and the paper guide on the left is snug on the left side of the paper. Then try to form feed again. If that works, then try to print again.
Repair
Remove the paper, use a cloth and isopropyl alcohol, clean the rollers carefully, let dry insert paper neatly in tray to the stop.
Canon MX300 Paper Jam
I have the same problem - every time I turn on my printer now, the alarm signal shows up with "Paper jam" but when I check for jammed paper, there is none. So I think there's something faulty with the printer. Is there any way to reset it? I've looked everywhere but can't find it.
Error 5200 canon mx 328...
Please
reset the printer
1. Turn off your printer
2. Press
and hold the
STOP/RESET button
3. Press and hold Power ON button
4. While
holding the Power ON button, release the STOP/RESET button
5. While
holding still the Power ON button, press twice the STOP/RESET button
6.
Release the Power ON button
7. Wait until it display an "idle"
message. It will take about a minute.
8. When "idle" appear, open
the top cover to expose the cartridges.
9. Lift up the cover for
cartridge holder and take out both the black and color cartridges
10.
Return the cover of cartridge holder and turn off the printer
11.
Return the top cover and turn on the printer again
12. After the
printer initialize, return the cartridges.
1. Press and Hold the
STOP/RESET button and wait until it self restart.
2. Release the
STOP/RESET button the the printer is restarting.
3. Wait for a few
seconds
Not finding what you are looking for?