Top 20 Canon MP140 PHOTO AIO All-In-One InkJet Printer Questions & Answers

hi. have you tried print from other pc. ? if still the same issue maybe is a internal problem with your printer

APA SOLUSINYA ERROR 2

error 2 7

Sadly not. Canon inkjet printer don't tend to let you do anything without a full set of cartridges.

Try unplugging the power cord for 5 minuets in hopes to reset itand plug it back in.

first confirm is your printer say ready in your pc control panel--printer and faxes--------yor printer .if the answer is yes then try the second solution which is replace the ink cartridges.

If you are looking for the Canon printer driver for your model printer then -You can download the Canon printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload : -http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Well, here I am, nine years later, having the same problem. I have a Canon Pixma MP180 and want to use it only as scanner, with no cartridges at all. The method described does not do the trick for my Canon. So, could you help me?

Click the link below :----http://wikisolutions.blogspot.in/2012/02/get-free-answers.html

If the the printer has a Cancel button try, prerssing cancel several times, it may overide the ink error and go to a normal mode.You may want to try using the windows scanner instead of the printer OEM software to use only the scanner.Good luckwww;aaatvserevice.com

This mayclear the ink absorber problem.There is ink absorbers located at both ends of the printerwhere the ink head move.To dry the ink absorber, power up the printer and open the cover so the inkcartridges and print head will move to the middle of the printer.Then take several sheets of absorbent tissue, fold it into a pad and place itinside the printer over the ink absorber on the far left hand side of theprinter to soak up the excess ink. You may need to change the absorbent tissuea few times. Then repeat the same procedure on the right hand ink absorber.Close the lid and the printer should now function normally.

Yes both ink cartridges need to be installed in the printer for it to work.

You will either need to purchase new Canon ink cartridges for your printer or refill your old ones.

Take care!
damnor01

Hello,

E3 error stands for paper jam. Unplug the printer completely from all cables. Lift it up, turn it upside down and shake it a bit to see if anything comes loose. Check the rear access and front access using a flashlight to look for any tiny paper scraps or anything else that could be hard to see. Try forcing a very thick piece of paper into the rollers to see if it dislodges anything. Finally try using a dampened lint free cloth to clean the rollers in the printer.

In case this won't help, then it sounds like a hardware damage. Probably a damaged roller.


Lucas

You can download the Canon printer drivers from theirsupport WEB site. Please click on this link and select your model printer todownload :-http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

You might to visit your manufacturer website because they might have the latest driver that will work to a different OS version.

Thanks.

Windows Vista or Windows 7 users may experience a Printer Error 5 when attempting to print from your MYOB software.
To overcome this issue, turn OFF the User Account Control (UAC) in Windows. See below for instructions.
Note: Our support note Printer error messages, definitions, and solutions can be used if you are not using Windows Vista or Windows 7 and are receiving a Printer Error #5.

To turn off UAC in Windows Vista

-Close out of your software.
-Click the Windows Start button and choose Control Panel.
-In Windows Vista click User Accounts and Family Safety.
-Click User Accounts. You may need to select a User Account, if so, choose any account.
-Click Turn User Account Control on or off.
-You will be prompted with a window entitled Windows needs your permission to continue. Click Continue to this message. If you are not setup as an Administrator user on this machine, you may be prompted to enter a Administrator Username and password.
-Deselect the option Use User Account Control (UAC) to help protect your computer then click OK.
-You will be prompted to restart your computer. Click Restart Now.
-You may get a warning to Check your computer security. This is a standard message that Windows recommends User Account Control to be always turned on.


To turn off UAC in Windows 7

-Close out of your software.
-Click the Windows Start button and choose Control Panel.
-Click User Accounts.
-Click Change User Account Control settings.
-Click and drag the slider to the lowest position, in other words Never notify.
-Click OK.
-Restart your computer to complete this change.

Hi, try to press Stop/Reset button for few seconds and then release it. It shall back to normal after that. Hope it works for you. Good luck =)

You can try to reset with MPTool. You can download it on this page: http://tricks-collections.com/reset-canon-pixma-mp150-mp160-mp170-mp180-mp450-mp460-mptool-software/.
On the download page you can read and the use instructions.

If I could be of further assistance, let me know. If thishelps or solves the issue, please rate it and give a testimonialfor my response.

this is what your error means

E5-5
= The ink cartridges are not installed or a non-supported ink cartridge
is installed, or the ink cartridges are not installed properly.

are you using brand new supported ink cartridges?

are they in the right way?

You need to replace the cartridge with a new one original canon,not refill.