20 Most Recent
Canon MP140 PHOTO AIO All-In-One InkJet Printer - Page 9 Questions & Answers
Not recognising new ink catridge
Please consider the following:
Are you using a factory new ink cartridge?
If you are using a refilled or third party cartridge that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks causing problems with print quality or damaging the physical printhead.
If you are using factory new cartridges, then please call the manufacturers Technical Support for assistance with the warranty on the cartridges
Don
Why my scanner does not work?and my printer
Thats like asking why your engine works but your tires are flat. You need scanning software on your computer for the scanner to work, but if you just want a copy you press copy. It won't scan until it knows where to send the scan and how you want it scanned.
Error E5
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
It shows a e and a 5 number all the time and then
Are you trying to use a re-filled cartridge or a third party cartridge?
If so, the printer's logic may be blocking the use of the cartridge.
If you are using a factory new Canon cartridge, then you need to contact Canon Technical Support.
Don
Ink absorber is full, cannot print
Follow this procedure:
- Start with printer off
- Press and hold resume Button (triangle in the circle) and click “Power” button. green led should be on
- While holding the Power button, release the Resume Button.
- Without releasing the Power Button, click “Resume” button for two times and release Both Buttons.
- Click “Resume” for four times then soon click “Power” button, to confirm the selected action (reset counter absorber).
- Turn off the printer and turn on again.
MP140 can't recognise the black cartridge that
Error code 4 normally indicates that there is no unk, and the solution is by installing a genuine cartridge, Try to use Black PG40 remanufactured Canon printer ink
cartridge. This cartridge is a high capacity cartridge which has been
filled with 23ml of ink compared with the 16ml (Black) that you get
with the originals. Compatible with: Canon Pixma MP140. if this error still occur it is better that you try the following procedure below:-
When you insert a refilled ink cartridge into your Pixma MP140 printer
you should get a warning about the refilled cartridge. You should also
be prompted, asking if you wish to disable ink level detecting. Agree
to do so, and you won’t get the warnings again because the ink levels
won’t be monitored by the printer.
Thanks
It's a Coanon A.I.1 printer model mp140 i've
E4 is a ink empty error.There is a memory in the cartridges and printer still recognize it like empty.You need to turn off the function on printer to show the ink level.Push and keep the "resume"button for 5 seconds.
Canon MP the problem is error E4
E4 says the ink is empty, sometimes you can print if you just press and hold the OK button for a few seconds, but if the error doesn't clear, you will have to replace the color ink before you can print in just black.
Instal new ink and error E5 appears
This is an error athat shows that the FINE Cartridge may not be installed properly, or the Cartridge may not be the compatible with this machine. the cartridge may be faulty or if it is a compatible type that you have not used before it may have adefective chip and you will need to Install the appropriate FINE Cartridge. If lines are misaligned or the resulting output is not satisfactory, carry out the FINE Cartridge Alignment
Ink Refill
You have refilled the ink that is why it reports low ink.
The explanation for this, is that the ink cartridge estimates the ink level by using the number of pages you have printed. Once you have reached a pre-programmed number of pages, the ink cartridge reports that it is empty; but it is not necessarily empty.
If it prints then continue printing. However, it will always give a low ink warning. Remember to get it refilled once the pages start getting missing text (or graphics).
If you cannot print, then you will either have to purchase a new cartridge or ask the person at the refill shop to reset it, if it is possible.
Not finding what you are looking for?