20 Most Recent
Canon MP140 PHOTO AIO All-In-One InkJet Printer - Page 7 Questions & Answers
New ink not recognized
You have probably purchased refilled cartridges. Try to replace with genuine ink cartridges will solve out your problem.
Inks won't work.
You have probably purchased refilled cartridges, try to replace with genuine ink cartridges will solve out your problem.
Canon PIXMA MP140 - c light flashing
This means you are getting low on color ink. You can continue printing for a while, but eventually you will get an error message (E,4) indicating that the ink has run out. Purchase, or have ready, a new color ink cartridge.
How to handle when catridge have problem when i
Hi there it is ink error.
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.
But some time when you get the chance do clean the waste tank out.
?
- Start with printer off
- Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
- While holding the Power button, release the Resume Button.
- Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
- Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
- Turn off the printer and turn on again
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Canon MP140 fails to print
I don't think that has anything to do with reaching the board of 5000 copies. Your cartridges have no chips on them or anything. You might actually have a problem with your black ink cartridge, as the printer is telling you. Remove the black cartridge, gently wipe the contacts with a dry cloth and put it back in. Hold the "resume" button (triangle in circle) for about 10 seconds to try and reset your cartridge. If none of that works, I suggest you buy a new black ink cartridge.
My canon MP145 's alarm is always on. Nothing
Hi there gave this a go it may do the trick for you.
Ok I have put a MP-Tools in my website for you to try out this tools are for reseting your inks plus it can do much more.
The MPTools can reset it in till you get time to clean the inkpads.
Click on the link to download it.
Click Link =
http://www.4all2sell.com/reset-tools/MPTool.exe
All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best
: Pineworks
All files on my website are only there for a limited time
I changed the black ink cartridge recently and it
Hello there
This may work for you, it has worked for many here I given this advice so gave it a try it could work for you.
Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.
First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.
If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Not finding what you are looking for?