20 Most Recent Jazz DV-179 Digital Camera - Page 7 Questions & Answers

Try here.

http://www.ebookspdf.com/gadget/1937/olympus-digital-camera-c-5000-zoom-reference-manual/

The battery may be too low to kick start into charge mode. Buying a new battery will get the camera working again.

Power button will not work and camera will not power on when LCD panel is opened. New camera used one time. Any suggestions on how to power up or to troubleshoot

maybe you sd card is locked try UN-locking it :D

Yes I f you knoe how to read the manual :D

Local retailer suggested a universal charger for the 3.7 volt battery and take it out and charge it and put it back in. A bit cumbersome but it might work as long as the charger has 3 contacts in the right places

The sensor diode has died needs repair service

Look exact model and try to search the driver through search system.
http://filters.atspace.com

Called support and they told me, the motorola charger is good only if you don't let the battery fully discharge . Once fully discharged it will not recognize the charger, don't let the battery icon flash or turn red, and you should have no problem.

I had hoped that there was an unadvertised code or key sequence to disable the chime, but I guess not. I am going to simply disconnect (if I can) or destroy the little speaker that produces the chime melody. It doesn't do anything else that's useful so I know I will not miss it.

I don't think I need a group of "experts" to ponder over this, for a fee. But thanks for the offer anyway.

--Bruce Mann

Try taking out the battery and turning it around. Making sure it's in correctly. Plug the USB cable in the back under the directional pad. Pleas, rate me!

How long do I need to charge

No it will not....the USB cable is for attaching the camera to the computer...and uploading the pictures....you will need another charger....
I hope this helps....good luck....the Fang.

Your Aunt Needs the Drivers for the avi file. do you have them installed? they were on the disk. it also had a converter and an editor, which were optional. you should use the converter app, if its installed to convert it to wmv, or mpeg. in it under the two dropdown menus, it will say something about codec. as long as Arcsoft isn't around there, your aunt should be able to open them with out a driver.

The USB adapter gets plugged in the back. The HDMI cable gt plugged in under the flash (take off the HDMI cover)

Does it only light up when you adapter is plugged in? If so try taking out the battery and making sure it is in correctly. Press the power button under the screen on the side if the unit and the middle circle in the directional key pad, there should be a menu that comes up.

Try taking out the battery and turning it around. Making sure it's in correctly. Plug the USB cable in the back under the directional pad. Pleas, rate me!Watch close for Dragonflies

You may want to try taking out the battery and turning it around. Making sure it's in correctly.

You may want to try taking out the battery and turning it around. Making sure it's in correctly.

Keep watch for Dragonflies,

Shaun