20 Most Recent LG LDF8812 Stainless Steel Built-in Dishwasher - Page 3 Questions & Answers


Yes. I have the same problem. We've owned for just a few months. Crack is just to the right of the time. I have the extended warranty from Lowe's. If this is a known problem they will likey replace it.
6_4_2019_3_11_11_pm.jpg

LG Dishwashers | Answered on Jun 04, 2019


I'm guessing, but I would look for a water level issue. Maybe the float switch assuming you don't have water on the floor.

LG Dishwashers | Answered on May 27, 2019


I believe the time displays based on your selection. If you don't see any change when changing selection it may be a faulty touch panel.
Assuming you tried resetting the whole unit. Sounds like program error in the main board.

LG Dishwashers | Answered on Apr 16, 2019


http://www.lg.com/us/support/product-help/CT10000009-20150140938312-other-error-codes

LG Dishwashers | Answered on Apr 16, 2019


CONTACT LG AND ASK THEM OR Google IT BUT IF NEW IT SURELY HAS WARRANTY .AND YOU MIGHT MESS THAT UP IF YOU TRY WORKING ON IT YOURSELF

LG Dishwashers | Answered on Apr 16, 2019


Your dishwasher washes & rinses fine, you are having a problem with the drying part of the washer. It's the heating element. But just to be sure, clean out the bottom of the washer. You can simple unscrew the plastic nut from the bottom, lift off the cover & remove all debris. replace cover & nut. You could try to run the washer empty & let it have a good cleaning(I do this once a month) Cleaning the washer probably won't help the unit go into the dry cycle, but it is something you should do monthly, for PM. If you know someone handy they can replace the heating unit ordered from LG or your Manuel may give you some places.(or off the web) AND if you are lucky & the dishwasher is less than 1 year old it's still under warranty for parts only. Labor is what gets you. Again, most people know someone who is handy. Sorry I couldn't give you good news.

LG Dishwashers | Answered on Apr 12, 2019


It looks like the LE code means the motor is under a larger load than expected.

I am not sure but it may be worth checking the impeller that pumps water at the bottom of the unit. I had one that made contact with the bottom of the filter cover and melt the plastics to each-other which caused a different error code that basically translates to the motor failed. In this case my motor wouldn't move at all, Yours may still be moving, but the additional friction could be throwing the code and stopping the load.

The easiest way to check is to remove the drawers in the unit and open up the sending unit cover in the bottom (as if you were going to replace the impeller), It is usually somewhere around 8 screws and should come off relatively easily, If not, look for missed screws. Check the top of the impeller and the bottom of the impeller cover for any signs of contact. I had signs on the bottom of the filter, I scraped the melted plastic off of the cover and the impeller, reassembled and my issue went away. Hopefully yours is the same. Good luck.

LG Dishwashers | Answered on Apr 12, 2019


First things first, safety is always first so put on gloves, eye protection, etc. but most importantly turnoff the breaker that supplies power to the dishwasher, you'll find this in your home's main breaker box/fuse panel. Verify it's off by attempting to power the dishwasher on after turning off power at the breaker! Now, remove it from underneath your countertop or wherever it is, carefully unhook all electrical connections and hoses, swap out the pump, it's simple, accessing it is more troublesome than actually doing it!
ef038e7a-d122-439c-aead-5573a8ecd512-uirlbmmdnsc10qdkrvpu2msd-3-9.jpeg

LG Dishwashers | Answered on Mar 24, 2019


could be the salt level is low. check the tank in bottom of the dishwasher inside.

LG Dishwashers | Answered on Feb 03, 2019


Do the top buttons still work even without the backlight? or are they not functional as well.

One of the more common issues I have seen that can cause that is the sound-deadening insulation in the door (which is rubber-like) will sometimes get the wires stuck in it and as the door is opened and closed they will stretch and break. It may be worth checking in the door to see if you have any broken or segmented wires.

LG Dishwashers | Answered on Jan 25, 2019

Not finding what you are looking for?
LG LDF8812 Stainless Steel Built-in Dishwasher Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Top LG Dishwashers Experts

Marvin
Marvin

Level 3 Expert

84966 Answers

Mike

Level 3 Expert

4357 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a LG Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LG Dishwashers

  • LG Dishwashers

Most Popular Question

replace door springs

  • Dishwashers
Loading...