Top 20 Sylvania LD370SS8 37 in. LCD Television - Page 8 Questions & Answers

HELLO THERE YOU NEED BUY NEED MANUEL AND SEARCH MODEL AND NUMBER

That part number BA71F0F01042 is for the power supply. You can find someone on Flea bay that are selling it. Where did you find the other part number?

Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. http://electronicshelponline.blogspot.com/ The most probable cause is with its audio output IC itself; overheats.

Yes. One at just 2KM away. "Hitlers' channel"

The tape mechanism belts have stretched and the unit is not running properly. When this happens, microprocessor is programmed to eject tape and shut down unit.

My guess is that you will have to run a factory restore. If you have vital important data on the tablet that you cannot loose then you should be thinking about that first. I recommend you search youtube.com for alternate possible solutions. To backup your data one might be to boot to linux using a usb-pen drive or DVD, Barts Boot disk is another option which may enable booting into WinXP OS to backup your important data before applying a Factory Restore. If this is a laptop (After you have performed the Factory Restore) I encourage you to download a copy of Macrium Reflect and learn how to use it to create a backup of your system. Then if it ever happens again you will be able to restore a previously saved image that is not infected.

I assume you mean the TV/DVD player. There is an Eject button on the front panel of the TV. This is the fourth button from the right. (The power button is the right-most button.) The TV does need to be on to eject the DVD. I hope this helps. Cindy Wells (note: if you used a mini-disc or have two discs inside the slot, the eject feature won't work.)

Try unplugging it from power for a while, 10-15 minutes, then plug it back in and try it again. If it still doesnt work then chances are the power supply inside needs repair. The most common problem with LCD tv's is failing capacitors in the power supply, they appear to have power and the standby light comes on but they just refuse to turn on.

viruses dont affect a dvd player however it does seem that maybe there is an issue with the dvd player panel if its opened up and the picture of it remains even after restarting the dvd player with no disk then the LCD panel needs replacement if you meant a computer please install Zemana AntiMalware or Malwarebytes AntiMalware on your pc and do a full system scan also use ADWCleaner as well

Turn the TV over there are screws.

no can do.

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Laser pick-up unit fault. Check and replace it. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

yes there are many stores you can walk into

It is the little glass bead in the middle of the transport mechanism

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

0054, 0030, 0020, 0096

Please send the model number and approximate age of the tv so I can assist better. thank you

Those blinks are fault indications. From the number of blinks you can get an idea about the fault circuit board. If you wish to get more details visit the site linked. Blinking codes of many popular brand sets are given in detail. http://electronicshelponline.blogspot.com/

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.