20 Most Recent Yamaha HTR-6030 Receiver - Page 5 Questions & Answers

I don't know if this is a solution but I was getting the same thing and adjusted the dynamic range to min and it seemed to get rid of the crackling sound. Not sure why that works but it does.

th3 remote you need is a rav311
part number wj4d93ous

u could have it cross wired some systems wire in sequence not always pos and neg

theres probably a problem with the right channel cable or plug that connects the tv to the reciever, or the tv is set to mono audio.

I returned the Yamaha and I bought a Sony receiver.

Make sure you speakers are turned on on the receiver,

the problem is how you wired it, guess you plugged the ps3 directly to the tv. to hear the ps3 through surround sound, you would have to wire it through the reciever like everything else...

I suggest if your handy , to open the receiver and look for a circuit breaker or a fuse that protects unit of being damage , replace it and turn it on , hopefully it will work .

Hope this helps

The Yamaha HTR-6030 offers two types of video monitor output: Component and Composite. You may need to connect both types to your television as the HTR-6030 does not have composite to component video conversion. In other words, to view your VCR on your TV, you need to use the composite video monitor connection. However, for a DVD player or other source that has component video connections, use the component video monitor output to your TV. If your TV has both types, you simply switch between the two with your TV remote to access the proper video monitor output signal from the HTR-6030.

Most likely the receiver has an internal equalizer that can be adjusted accordingly, if not an external equalizer will most definatley help you seek out problem frequencies and get the best quality, a completely square room is the worst situation for audio especially that small, i suggest if you can just moving it into another room.

Hi!
maybe you select the Fader mode.. you simple select the fader balance to center then you hear the sounds coming out to the front fader mode.

turn on your video and start something playing, press the speakers button repeatedly until the sound comes back. this should bring back your front speakers, if it doesn't, double check your speaker connections and sound field program.

the speakers button should cycle through all available front speaker options.

"Opening" ... Please explain what you mean.

Yes if it has a suitable speaker connection available and is nominally 8 ohms impedance Speaker and AV.

Being from 1985 or there abouts, it probably needs some TLC at a Yamaha service centre. May need new capacitors and resolder dry joints for age related issues.

WD-40 ... Very dangerous as it not only flammable when wet but is bad for electrical contacts as it leaves a residue behind that does not conduct electricity very well. Check speaker connections first.

(francais) hello in my issue the probleme was a little resistor r027 it's in this red zone and very ugly. easy to find. a friend was unsolded the resistor and weld a little wire after wash with isopropanole alcool. the resistor test the tension when we plug usb thing. less the resistor the usb ports don't work. you can buy r027 for 2 euros for 100 pieces.... or 2 euros for 5 10 pieces (funny).

Follow the procedure as given in following link. RX-V6A ' ENJOYING IN MULTIPLE ROOMS (ZONES) (yamaha.com)

Question edited for clarity, full make model (what it is)'. Question moved to Yamaha Audio. It may be sympathetic vibration and is coming from something nearby. Put it on a folded towel or sit in the floor to test it. https://www.google.com/search?q=YST-FSW050+bad+vibration ..