20 Most Recent Yamaha HTR-6060 Questions & Answers

loading time it is because you are doing it quickly no problems

There is a stereo MIC plug on the front of the receiver. Labeled "Optimizer MIC" same size plug as a Ipod head phone jack.

yes. its within the speaker setup screen. you need to tell it that your using a sub.

So is it totally dead? Or just no displays? What signs of life DOES it have?

Start on Page 93 of the manual and find your symptom.

Digital settings need to be assigned by the receiver in the ption Menu >> Audio Select.

Check the one for the HDMI from DTV/CBL.

analog fm is broadcast in stereo you would need to use a simulated surround setting to have sound come out of your rear and mid surround speakers.
your manual says the default setting for fm broadcast is:
Radio Listening TUNER MUSIC ENHANCER
7ch Enhancer
Select this SCENE template when you enjoy FM or AM
radio programs.
make sure you unit is not in straight mode try pushing the straight button on the front of the receiver let us know if more troubleshooting is needed.

Cheers!

"Opening" ... Please explain what you mean.

Yes if it has a suitable speaker connection available and is nominally 8 ohms impedance Speaker and AV.

Being from 1985 or there abouts, it probably needs some TLC at a Yamaha service centre. May need new capacitors and resolder dry joints for age related issues.

WD-40 ... Very dangerous as it not only flammable when wet but is bad for electrical contacts as it leaves a residue behind that does not conduct electricity very well. Check speaker connections first.

(francais) hello in my issue the probleme was a little resistor r027 it's in this red zone and very ugly. easy to find. a friend was unsolded the resistor and weld a little wire after wash with isopropanole alcool. the resistor test the tension when we plug usb thing. less the resistor the usb ports don't work. you can buy r027 for 2 euros for 100 pieces.... or 2 euros for 5 10 pieces (funny).

Follow the procedure as given in following link. RX-V6A ' ENJOYING IN MULTIPLE ROOMS (ZONES) (yamaha.com)

Question edited for clarity, full make model (what it is)'. Question moved to Yamaha Audio. It may be sympathetic vibration and is coming from something nearby. Put it on a folded towel or sit in the floor to test it. https://www.google.com/search?q=YST-FSW050+bad+vibration ..

You must repair the amplifier first. Take it to an authorised Yamaha service centre.

Visit 00_HTR-5750_U_EN.book (yamaha.com) and see page 59 (Troubleshooting).

Visit YAMAHA P-155 P-155S P-155B SM Service Manual download, schematics, eeprom, repair info for electronics experts (elektrotanya.com) for service manual. Check the pre-amplifier and power amplifier section.

You can't do this. The SpeakerCraft is a standalone amplifier. The Yamaha is a Receiver and has its own amplifier. Putting amplified sound into a data input is not recommended and will cause component damage and overload 'clipping'. https://www.google.com/search?q=SpeakerCraft+BB275 https://www.google.com/search?q=Yamaha+5.1+receiver I deleted the two answers from AI Answer Bots as they are not doing you any favours suggesting it can be done in their waffling answers! ..

Thanks for the compliments Gilbert. You have tried the reset so a Yamaha audio tech is the answer. This link will find you one close to where you live. There is probably a glass fuse on the power board, but you have to find out WHY the fuse blew? It is worth fixing in my opinion. https://www.google.com/search?q=yamaha+audio+repairs+near+me It does have a thermal fuse https://www.google.com/search?q=yamaha+rx-v663bl+no+power+on ..