Thank you for your inquiry, friend!
From my understanding your Frigidaire dishwasher doesn't drain properly. It could be possible that your drain line or filter trap is clogged. I would recommend checking the drain hose to make sure it is not clogged or kinked. You can also look at the filter in the bottom of your tub to access that filter you would need to remove the rack and it is located right under the spray arm. You should be able to lift up and pull the trap out if it is dirty clean it and reinstall it. If everything appears to work properly it could be a possible issue with your drain pump and you may need to have it replaced. I hope this information is helpful for you. -Matt
Good afternoon friend, thank you for your post!
I see you are having trouble with your Frigidaire range and you are receiving error code "Sd". However, it appears "Sd" is an invalid error code. It is possible that the error code is missing characters?
In the meantime, let's attempt resetting your range. You can do this by unplugging it or flipping the household circuit breaker to the off position for roughly ten minutes. This usually clears false error codes. If resetting the power does not correct the issue, could you please inform me of the new error code or if your dishwasher continues to display "Sd". I look forward to assisting you. -Matt
Thank you for your post, friend! I see that you are receiving an excessive frost buildup on the inside of your Frigidaire refrigerator. I would check the gasket to very it is sealing properly. You can do that by using a dollar bill. Place the bill between the body of the fresh food and close the door. The dollar bill should stay in place and pull out with a small amount of resistance. If the dollar bill falls out when placed between the gasket and cabinet then the gasket may need to be replaced. I hope this information has been beneficial. - Matt
Hey friend, I appreciate your post!
If water is forming on the bottom of your Frigidaire refrigerator I would recommend performing a manual defrost. You can do that by disconnecting power from your appliance for roughly two to four hours. If that does not help correct the problem I would recommend having a professional come out. -Matt
Hello friend, thank you for your post! I understand that your evaporator fan keeps starting and stopping on your Frigidaire refrigerator, PLHS267ZCB2. It sounds like it could be an issue within the fan or control panel. Since it could be any one of these underlying issues I would recommend having a technician come out to properly diagnose your appliance. -Matt
I appreciate your post, friend!
I see your question is labeled under Frigidaire refrigerator, GLHS269ZDB. In order to get your ice hold back in place you should be able to line it up and push it into the rear of your refrigerator. If you continue having difficulty with installing the ice bin I would reach out to a technician in your local area for support. I hope this is helpful. -Matt
Hello friend, I appreciate your post!
I see you are asking about a Frigidaire washer leaking but your question is labeled under refrigerators. If your washer is leaking it could be a problem within your motor, water valve, drain pump, or seal inside your washer. If you are speaking about a refrigerator it could be an issue within your water valve, water filter, or an air leak causing condensation.
I would recommend having a professional come out to the home for a proper diagnose and repair. I hope this is helpful. -Matt
605 questions posted
Usually answered in minutes!
750 Questions
598 Questions
272 Questions
173 Questions
145 Questions