20 Most Recent
Panasonic KX-TG1033S Cordless Phone - Page 6 Questions & Answers
Erase missed calls on panasonic
I found a way. Press the menu button on the phone. Then it should say "View Caller ID". Press the menu button again. You should see one of the missed calls you had listed. Now press the mute key. It should show a screen that says, "Erase? -Yes -No". On this screen, press the mute key a second time. It should now show "Erase" in larger font. Press the down arrow on the D-pad. It should now say "Erase all". Press the menu key, and if it worked, "No items selected" will show up on the phone.Hope this works for you.
4/5/2013 5:40:51 PM •
Panasonic...
•
Answered
on Apr 05, 2013
Blue Tooth compatability
Blue tooth is proprietary and your phone may not have blue tooth
options.Check your user mauual to see if your phone has blue
tooth.
tk46
2/27/2013 3:43:12 PM •
Panasonic...
•
Answered
on Feb 27, 2013
Voicemail
Press and hold the "Mute" or "Clear" button until the handset beeps to clear the New Voice Mail allert.
1/21/2013 3:56:18 PM •
Panasonic...
•
Answered
on Jan 21, 2013
How do i activate my caller id on my panasonic KT-2361JXB?
Is this a standard POTS line(Plain Old Telphone Service)? If so,your service provider needs to test it at the NID to verify it is working.Certain line conditions or troubles can cause the Caller ID data to be lost.I have seen defective phone company equipment cause it not to work,or a large bridge tap on the copper cable pair to knock it out.
12/30/2012 11:24:54 PM •
Panasonic...
•
Answered
on Dec 30, 2012
New message
You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
12/3/2012 5:01:38 PM •
Panasonic...
•
Answered
on Dec 03, 2012
My phone are not charging is it the batt
First Option:mostly nokia chargers doesn't make problems...just try the following..connect ur mobile with a system (usb cable)...found out whether it is charging or not...if the same prblm appears then there is a prblm in ur cell phone or power jack(socket)...if it charged with usb cable buy a new chargerPlease change Phone Bettery and check the chargingIF Charging Problem not Solved SoSecond Option:Your Phone charging IC Fault So Please change charging ICAnd charging Problem will Solved Quickly
11/9/2012 3:09:01 PM •
Panasonic...
•
Answered
on Nov 09, 2012
My phone display's No link to base. Reconnect main bas AC adapter. It is plugged in what now?
I had this problem, and I fixed it by re-registering the phone to the base. Here are the directions for how to do that from the manual:----->Registering a handset to the base unitThe supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset.1 Handset:{MENU}2 {V}/{^}: "Initial setting"{OK}3 {V}/{^}: "Registration"{OK}4 {V}/{^}: "HS registration"{OK}5 Base unit:- KX-TG4011 series: Press and hold {LOCATOR} for about 5 seconds. (No registration tone)- KX-TG4021/KX-TG4071 series: Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds. If all registered handsets start ringing, press the same button to stop. Then repeat this step. The next step must be completed within 90 seconds.6 Handset:Press {OK}, then wait until a long beep sounds.Note: While registering, "Base in registering mode" is displayed on all registered handsets. When you purchase an additional handset, refer to the additional handset's installation manual for registration.<-----See
http://service.us.panasonic.com/OPERMANPDF/KXTG4011-MUL.PDF (page 22)
10/22/2012 1:20:34 AM •
Panasonic...
•
Answered
on Oct 22, 2012
Not finding what you are looking for?