20 Most Recent
Frigidaire 30 in. Electric Gallery Series Self-Cleaning Double Wall Oven - Page 8 Questions & Answers
I have a Frigidaire oven that's does not heat up to high temp.
If your Frigidaire oven is not heating up to the high temperature, there could be a few possible causes:
- The thermostat may be malfunctioning: The thermostat controls the temperature of the oven and if it's not working correctly, it could prevent the oven from reaching the high temperature.
- The heating element may be malfunctioning: If the heating element is not working properly, the oven may not be able to reach the high temperature.
- The control board may be malfunctioning: If the control board is not functioning properly, it may not be sending the correct signals to the heating element or thermostat, preventing the oven from reaching the high temperature.
- The oven may be in a cleaning or self-cleaning cycle: when the oven is in a cleaning cycle, the temperature is raised to a high level to clean the interior of the oven.
- The oven may be in a energy saver mode: some ovens have a energy saver mode that decrease the temperature by a certain degree to save energy.
Temp control knob loose on old Frigidaire oven
my best guess its A Frigidaire wall oven, circa 1966-1970,unsafe to use at any time if the temp controller trips the circuit breaker could be the oven thermostat causing the trip as well if Frigidaire are still in businessYou will need to ask an electrician to fit a /tested used controller or new superseded part temp controller and knob
Any idea on how to fix my double wall oven?
That doesn't sound good and is likely to be a Control Board issue. Turn it off tonight at the breaker and turn it back on in the morning. That is the closest you will get to a Reset.
The light in the oven is just a simple switch connected to the door hinge.
Model FEF387XECB. What does PF code indicate?
PF means power failure. This is a loss of power that may be inside the stove or it maybe an issue with the wiring in your house. The biggest threat would be the wiring in your house and you should call an electrician to check the breaker panel and outlet. If it is not that, then you can look for a loose connection inside the stove.
Not finding what you are looking for?