Top 20 Disney 13" TV Questions & Answers

The yellow is video. Red and white are sound. If you are connecting a DVD you need to find INPUTS on your television. Depending on the age of your television and / or DVD, compatibility may be an issue. Try the internet for advice on your particular set as even some with HDMI inputs will only display picture and not sound. You could even ask at your local electronics store. Believe it or not, there are still some nice people out there. Not sure if this will help but good luck.

Its either on a timer or its broken

You will possibly need its original remote to remove them. Thanks for using Fixya.

if that 2 band according to you from top to bottom,it has a defective vertical stage.if this two band appears one on top and one at the bottom,it`s on vertical stage.leaky capacitors,resistance changed or resistor devalued ang ic`s, are too weak to amplify a signal to make the screen complete....

There are generally 2 ways to connect a dvd player to a tv.1 If you have 3 rca connectors on the back of your tv (they are color coded yellow for video and white and red for audio left and right channels respectively) and the same connectors on the back or side of the dvd player.Use rca cables to connect the dvd player to the tv,connecting yellow to yellow white to white and red to red.Using the remote put your tv on video.Put the channel selector on the dvd/vcr player on video or L1 or E1 (depending on what brand dvd/vcr you have).2 connect a rf (coaxial cable from the rf output of the dvd/vcr and connect this directly to the rf (antenna) input to your tv.Put the tv on channel 3.Play the dvd/vcr to see if you have the video.If not put the tv on channel 4.Some dvd/vcr's put their signals out on channel 3 and others on channel 4.Good luck.

http://www.retrevo.com/support/Disney-DT1350-C-TVs-manual/id/3815bh246/t/2/ Try this link.

The horizontal output section circuit should be troubleshooted. Contact any experienced service technician.

Code for p1300ntv to work with directv remote

disney 13" princess tv, any suggestions? You can "manually" find your code by 1. pressing

0727 0806 0826 0412 0698. Check these codes. If you wish to get more codes, check this link.

0087/0098/0065/0243

Either a power supply issue (a voltage too high or too low) or maybe a bad solder connection on the main board..In either case may not be worth a shop repair.....?

Have posted a solution to this problem.

PRINCESA USADA (Branding is Disney)

I HAVE A RCA UVNIVERSAL REMOTE AND I NEED TO PROGRAM MY PRINCESS TV

Try http://www.tacktech.com/display.cfm?ttid=145.

"If you are having difficulty identifying a component or peripheral you may be able to obtain company information by entering the item's FCC ID number" on their website. "The first three characters are the company Grantee Code. The next character(s) (1min to 14max) are the Equipment Product Code (EPC). Include -'s."

Good luck and please post back that you are successful and click thumbs up of your success or that I can be more helpful.

Try website like Remotes.com to buy the tv original remote.Little more exspensive than those universal remotes.Don't tries this tv with those universal remotes,it will not work or have universal codes for this tv.This tv was a specially manifacture for the Disney Corporation only for briefly period of time only by an small un known electronic Corporation for the late 90 Aminations cartoons movies fads only.

replace the batteries.....or may be ur LED bulb in the remote corresponding to the TV is bent in other direction.....place the remote in front of TV or may be your Digital Box and use it

This tv/dvd combo is a NTSC DVD disc region only.Only read DVD disc from US,Canada or Mexico only sorry.Can not changes it to mutiple region to read PAL DVD disc in Europe,Asia,Middle East or Africa.Must buy a region free DVD player to play all the world DVD disc regions.

there may be a problem with the tvs remote sensor. most universal remotes you dont even have to enter any codes you just have to follow the same steps to enter the code but instead of entering a code all you have to do is press the channel up button after following all other steps, just keep pressing up until it turns the channel on the tv then press enter or similar button after it changes the channel and this should lock in the code without entering a specific code.And if all other remotes only half the buttons work on if it happens with every universal remotes then it probably a problem with the remote sensor or the tv . Good luck too ya!!!

That model TV is made by Starlight Randix Corporation.