20 Most Recent Nintendo Wii Console - Page 3 Questions & Answers

try connecting the wii remote by taking the battery cover off and pressing the red button on the controller and the red button on the system at the same time

Nintendo provides many solutions in the link, hopefully one of them works.
http://www.nintendo.com/consumer/wfc/en_na/ds/results.jsp?error_code=32007&system=Wii&locale=en_US


All the causes of this error message should be able to be fixed by following one of these steps. Good luck.

does the cursor show up? have you been pointing towards the sensor bar? Are the batteries ok?
anke sure you check everything and anything. Take a break to think and check out something in the manuel if something's missing.

Try to attach it in another console or in a PC if it recognize it probably the issue is with your Wii.

Cancel your Creat card

Have you tried the following? If this doesn't work then pleae provide details on details such as the batterys you are using, number of remotes, etc.
The Wii maunual does not give clear instructions how to reset and sync your Wii remotes. I have found that from time to time my remotes will not sync, especially after they have changed 'order' a couple of times. It appears there is a bug in the code that keeps track of remote codes, and it has a limited buffer for the storage of remote ID's / order. Here are quick step by step instructions how to reset the remote list on the Wii console and re-sync your Wii remotes.

1. Un-plug the power cord from the back of the console for 5 minutes (60 seconds should do, but leave it off longer to ensure all the power drains).
2. Plug the Wii back in, and turn on the power button.
3. Open the panel on the front of the Wii unit. You will see a Red button.
4. Open the back panel of the Wii remote where the batteries are installed. Beneath the batteries is a small button.
5. Press and release the small button. The Blue lights on the front of the remote begin to flash.
6. Press the Red button on the front of the Wii unit.
7. The Blue lights on the remote should stop flashing after a few seconds. Then one Blue light will remain representing player 1.
8. Repeat for remote 2, 3 and 4.

Yes and no. None of the regular guns can be given infinite ammo, but you can unlock special guns with infinite ammo. Infinite Rocket Launcher - Complete the main game once to unlock this for use on a round 2+ playthrough of the main game. Cost = 1 million pesetas. Chicago Typewriter (machine gun) - Complete Assignment Ada to unlock this for use on a round 2+ playthrough of the main game. Cost = 1 million pesetas. Handcannon - Get 60,000 points on *all four stages* in Mercenaries mode with *all five characters* to unlock this for use on a round 2+ playthrough of the main game. Cost = free! However, you need to get it fully upgraded in order to have infinite ammo for it, which will cost about 770,000 pesetas.

According to Nintendo's website, error code 51332 means that your Wii is having a hard time connecting to your wireless network.
Make sure your router is working properly and that your Wii is configured properly for your network.

• All saved data, game data, and downloaded channels will be erased. Once erased, this data can never be recovered.

How to Format the System Memory Wii and Wii mini Nintendo Support

Try changing your channel on the router to 11 or 1. For Linksys WRT54G routers enter the ip address of the router (default is 192.168.1.1) enter password and user name (default is admin/admin) then click wireless tab, now select a different wireless channel from the drop down box. Fix is not guaranteed to work for all consoles. The WEP encryption has to be set on Key 1 in order for the Wii to recognize it. It's the same with the DSI found a solution to this. I was able to pass the connection test, but I would fail during update with code 32002. The solution turned out to be to enter manually the ip address of DNS that my wireless router used. (via email, thanks jamh)I had to change the MTU value from 0 (Default) to 1500 witch it was in the router for the Wii to finally connect and download the updates.Hope this helpsTom

The Wii wants to do a system update, but isn't letting you connect because your Wii is not updated. Catch 22.... Anyway, go to the connection settings it prompts you to, choose your connection one, save, then test. Should work now, and will prompt you to do a system update.

Depends on how far you are from your router and the construction of walls . You may need to get an extender which acts as a relay place it somewhere between the original router and the downstairs location. If it is a smart tv, follow the directions for the tv and make sure the adapter in the tv is compatible with your router. Check the specs.

hi try this...delete everything on the SD card and reinstalled USB Loader,