Top 20
LawMate BU-18 Wired CCD 550TVL Button and Screw Camera Set - Page 6 Questions & Answers
How do you connect a charge 3 with a flip 4
To connect a Charge 3 and a Flip 4, you will need to follow these steps:
- Make sure that both the Charge 3 and the Flip 4 are turned off.
- Connect the Charge 3 to a power source using the supplied micro-USB cable.
- Press and hold the Bluetooth button on the Flip 4 for 5 seconds until the LED starts flashing blue.
- On the Charge 3, press and hold the volume down and play/pause buttons simultaneously for 5 seconds until the LED starts flashing white.
- On your phone or other device, go to the Bluetooth settings and look for the Flip 4 in the list of available devices.
- Select the Flip 4 and follow the prompts to pair the two devices.
- Once the Charge 3 and the Flip 4 are paired, the LED on the Flip 4 will stop flashing and remain solid blue.
I hope this helps! If you have any further questions or if you are having trouble connecting the Charge 3 and the Flip 4, don't hesitate to ask.
9/8/2018 10:46:59 PM •
Video Cameras
•
264 views • 0 helpful votes
ZR85 doesn't recognize tape present
If your Canon ZR85 camcorder is not recognizing that a tape is present, there are a few steps you can try to troubleshoot the issue:
- Make sure that the tape is properly inserted into the camcorder. If the tape is not properly seated in the camcorder, it may not be recognized.
- Check the tape for any visible damage or wear. If the tape is damaged, it may not be recognized by the camcorder.
- Clean the heads of the camcorder using a head cleaning cassette or a cleaning solution designed for camcorders.
- If the camcorder has a manual tape loading mechanism, make sure that the mechanism is properly aligned and functioning.
- If the problem persists, there may be an issue with the camcorder itself. You may want to try contacting Canon customer service for further assistance.
I hope this helps! If you have any further questions or if you are having trouble troubleshooting the issue, don't hesitate to ask.
9/8/2018 2:10:46 PM •
Video Cameras
•
258 views • 0 helpful votes
No video link to camera 2
If you are unable to establish a video link to Camera 2, there may be an issue with the connection or with the camera itself. Here are a few steps you can try to troubleshoot the issue:
- Make sure that the camera is turned on and properly connected to the device you are trying to link it to.
- Check the connections between the camera and the device to make sure that they are secure and functioning properly.
- If you are using a wireless connection, make sure that the camera is within range of the device and that there are no obstructions blocking the signal.
- Try restarting both the camera and the device to see if that resolves the issue.
- If the problem persists, there may be an issue with the camera itself. You may want to try contacting the manufacturer for further assistance.
I hope this helps! If you have any further questions or if you are having trouble establishing a video link to Camera 2, don't hesitate to ask.
9/4/2018 6:19:30 PM •
Video Cameras
•
245 views • 0 helpful votes
I just bought a ONN Camcorder 1.44 digital screen with 2x digital zoom.
Question edited for clarity.
Question moved from '2X Computers'.
ONN is Walmart's Bargain basement brand made in China. The manuals are written in Chinese and translated in a very brief way by non fluent translators. The best option is to go back into Walmart Camera section and ask one of the associates to show you how it works. Make sure it is fully charged and take the manual with you.
10/20/2018 9:49:15 PM •
Video Cameras
•
38 views • 0 helpful votes
Not finding what you are looking for?