HP DeskJet F380 All-In-One Printer - Answered Questions & Fixed issues

go to control panel, then printers and faxes, then right click on it and click "use printer online"
hope this helps!

This printer model F380 will not show 0x610000f6 error. It means "Ink Delivery System failure". Please confirm your printer model.

You can call hp tech support toll free number - 1-866-987-2474 and they will give you all information regarding to your printer. for more information you can visit HP Customer service. Hope this will help you better.

download driver for your particular operating system https://support.hp.com/us-en/drivers/selfservice/hp-deskjet-1000-printer-series-j110/4066042/model/4066376

https://123-hp-com-envy6255.com/

same thing, woring one minute, next minute, offline. cords plugged in , no reason i have found but it happens all of the time

I had the same problem. I could print, but not scan.

However, if you open up Paint and go to file and scan, it will scan your document. For some reason, using the scan button on the printer itself will not work with Vista, but using Paint will. I also heard that using Windows fax and scan will also work.
good luck

Hi,
i was in HP tech support supporting AIO printer models, Just click on the link u will get a popup window to download the Driver for ur Printer.

http://snipurl.com/f380_driver_xp

Is it a legit HP ink cartridge? I have had a few knockoffs fail to be recognized in my printer. Seems like the printer companies are getting wise to the knock off brands

unplug the USB lead and plug it back in...if no response try another USB port, if still no response use a different lead or put a gentle bend in the one you have to make the connection tighter....make sure the printer is on of course

Might be scanner drivers corrupted, Reinstall the Scanner drivers again. Most probably this will work greatly You can try this no (877-690-9305) for the solution. Support For Hp Printer

Recognition of cartridges depends on several issues. Check and clean the metal contact points on the printer cartridge slot. Use rubbing alcohol on a q-tip and pat dry. Do the same on the ink cart. Any oil/film on the contacts can interfere with the communication network of the printer. Sometimes, printers just reject cartridges, mainly if you use off brand products. Naturally HP wants you to use their cartridges! Other than that, you must use HP Software updates for the computer and also, update each HP Printers FIRMWARE. Lots of folks forget that!

if you are using word to type the address use the tool bar to center it on the page then when you go to print , check the preview to see where it will be printed set the printer properties to envelope and use any old envelope to see where it prints

check out the HP website for support HP Deskjet 1050 All in One Printer J410a Troubleshooting

Listen, so you are a tad clutzy. Swallow your pride and continue to let your friend help you out. U would do it for him, wouldn't you?

I've been using an HP F4100 printer at our office for almost 2 years which is connected to another computer, using wireless network connection. As far as I can remember, I installed the driver on my laptop prior to adding the printer via the "Add a Printer" wizard. After installation and upon using the wizard which automatically detects the network printer, I was already able to start printing in wireless mode. Hope this works for you too. =)

Please check your wireless connection? are you sure you are typing the correct username and password for your wireless on your printer. if it is still not working fine then you need to call hp tech support at toll free number- 1-800-585-2494 or visit: HP Customer service . hope this will help you better.

HP Deskjet F325 All-in-One Printer » HP Deskjet F335 All-in-One Printer » HP Deskjet F340 All-in-One Printer » HP Deskjet F370 All-in-One Printer » HP Deskjet F375 All-in-One Printer » HP Deskjet F380 All-in-One Printer » HP Deskjet F390 All-in-One Printer

http://arris.force.com/consumers

Try HP Print Diagnostic Utility was created to help users troubleshoot and correct many common problems on Windows-based computers that can prevent printing.Follow the on-screen instructions to run the utility. Details and specifications File name: HPPDU.exe [1/1, 1.54M] System requirements: No additional prerequisites Released: 2010-08-13 Version: 3.0.0.013 Compatibility: Microsoft Windows Vista, Microsoft Windows Vista Home Premium (32-bit), Microsoft Windows Vista Home Basic (32-bit), Microsoft Windows Vista Business (32-bit), Microsoft Windows Vista Ultimate (32-bit), Microsoft Windows 7 (32-bit), Microsoft Windows 7 Home Basic (32-bit), Microsoft Windows 7 Home Premium (32-bit), Microsoft Windows 7 Professional (32-bit), Microsoft Windows 7 Enterprise (32-bit), Microsoft Windows 7 Ultimate (32-bit), Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), Microsoft Windows 7 Enterprise (64-bit), Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit), Microsoft Windows Vista (64-bit), Microsoft Windows Vista Home Basic (64-bit), Microsoft Windows Vista Home Premium (64-bit), Microsoft Windows Vista Business (64-bit), Microsoft Windows Vista Enterprise (64-bit), Microsoft Windows Vista Enterprise (32-bit), Microsoft Windows XP Fix/Enhancement: This version of the HP Print Diagnostic Utility provides an improved user interface in multiple languages, improved diagnostic and problem resolution capability, and support for usb and network connected devices.