20 Most Recent Spectroniq PDV-70X - Page 2 Questions & Answers


Mukhhe,

good day,to connect your DVD to TV screen follow this steps.

1) prepare your RCA cable ( 3 colored cable yellow/red/white)
note: always remember this

yellow = video
red and white = Audio (left and right)

2) at the back or front display of your TV screen you'll see RCA socket marked as "AV1 input" "AV2 input" etc... if your screen is only mono sound you can only see two sockets Yellow=video white= audio

3) at the back of your DVD player connect the RCA cable following the color code yellow to yellow white to white and red to red. after you connect the cable to your dvd player now connect the other end of thr RCA to your TV screen input.

make sure you'll connect it to "A/V input" not "A/V out" then after connecting all the cables, from the remote commander of your TV screen press a button indicating "A/V" some mark as "TV/AV" press this button until your screen display the back ground display of your DVD player.

cheers,
mark

Spectroniq... | Answered on Jan 30, 2009


Tried inserting a cd with music or mp3s? If a cd will play and not a dvd it may be a country code problem.

Spectroniq... | Answered on Jan 16, 2009


Does it have a plastic latching mechanism that may be broken? Does it operate when the cover is held closed or will the cover not move into the closed position, or does it move into the closed position and just not stay shut?

Spectroniq... | Answered on Dec 10, 2008


Inside the machine the laser will sometimes adjust itself to a position just out of reach of the disc and you will get a "default message", so it doesn't necessarily mean you have the "wrong disc". This can be adjusted by yourself or take it in to be done. This is only, of course that you have covered the basics and cleaned the discs and inside machine. Just blow in it even, they do attract dust as dvd's are like a magnet to dust.

Spectroniq... | Answered on Nov 30, 2008


Bad news ** it may have damaged the Laser or knocked it out of alignment. A Electronic Tech would have to do that kind of repair.
Depending on what brand it is it may not be cost effective to repair. If it was made in China there will probably be no parts available

Spectroniq... | Answered on Feb 22, 2008


go into settings, click tuning, zone ,analog or digital, click start, will download channels if present.

Spectroniq... | Answered on May 04, 2018


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

Spectroniq... | Answered on Nov 24, 2016


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Spectroniq... | Answered on Aug 05, 2016


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/

Spectroniq... | Answered on Apr 15, 2016


Universal remotes can be bought in most electronic stores, Big Department stores or ordered online. See links below.
Show your gratitude and press the helpful button and follow me on fixya for more tips and info.

https://www.google.ca/aclk?sa=l&ai=Cjk7tPCTFVsfXHYXtpAPMy7aID5T_lccH3PXs6d0C0K3MCQgAEAFg_bCYgegDoAHa4Pj9A8gBAakC77WLpYWDqD6qBCJP0L_6r_44mIPVZ2NdYmgT-qo_YFfZ7QScZX8JG-YfBWNfgAeOn4cCkAcBqAemvhvYBwE&sig=AOD64_0ulvlP98B1rW_jH8OcZd7NFUhpMg&clui=0&q=&ved=0ahUKEwj8ka2hmoDLAhXmtoMKHVpEC_wQ0QwIGQ&adurl=http://clickserve.dartsearch.net/link/click%3Flid%3D43700007524302597%26ds_s_kwgid%3D58700000579323988%26ds_e_adid%3D93733534644%26ds_e_matchtype%3Dsearch%26ds_e_device%3Dc%26ds_e_network%3Dg%26ds_url_v%3D2%26language%3DEN-CA

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&sqi=2&ved=0ahUKEwjctJjmmoDLAhVJlYMKHdugAeIQFggcMAA&url=http%3A%2F%2Fwww.walmart.ca%2Fen&usg=AFQjCNGUg9P_2ah-D9uNan41nmBewXkaAg&bvm=bv.114195076,bs.1,d.amc

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=10&cad=rja&uact=8&sqi=2&ved=0ahUKEwij5pnymoDLAhUouoMKHenjBp8QFghCMAk&url=http%3A%2F%2Fwww.bestbuy.ca%2F&usg=AFQjCNFUFW_nmgr3xSbQPhCvTc9zkBEO-w&bvm=bv.114195076,d.amc

https://www.google.ca/aclk?sa=l&ai=COF4JDiXFVoepFImepgPkt4DgBJnnlewHyZzEta0CnsCCBggAEAFg_bCYgegDoAH90sr2A8gBAakC77WLpYWDqD6qBCFP0IIhy12nRo9Vh3eLkjle8Pkiyk5K19ua4uyoZWGbmZaAB7mqrAGQBwGoB6a-G9gHAQ&sig=AOD64_14LskVDI7V3nMtMjHhuBf_finEGw&clui=0&q=&ved=0ahUKEwiq3rSFm4DLAhUBvYMKHeLbB5wQ0QwIGQ&adurl=http://pixel.everesttech.net/4202/cq%3Fev_sid%3D3%26ev_ln%3Dsears%2520outlet%26ev_lx%3Dkwd-12623902%26ev_crx%3D80881039801%26ev_mt%3De%26ev_n%3Dg%26ev_ltx%3D%26ev_pl%3D%26ev_pos%3D1t1%26ev_dvc%3Dc%26ev_dvm%3D%26ev_phy%3D9001059%26ev_loc%3D%26ev_cx%3D161042401%26ev_ax%3D7576498801%26url%3Dhttp://www.sears.ca/outlet%253Fextid%253D250913_ca_1search_2en_3gogl_4outlet_5en-sears-outlet-brands-e_6sears-outlet%2526s_kwcid%253DAL!4202!3!80881039801!e!!g!!sears%252520outlet

Spectroniq... | Answered on Feb 18, 2016

Not finding what you are looking for?
Spectroniq PDV-70X Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top Spectroniq Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

The Knight
The Knight

Level 3 Expert

76100 Answers

Jayesh Panchal
Jayesh Panchal

Level 2 Expert

279 Answers

Are you a Spectroniq Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Spectroniq Televison & Video

  • Spectroniq Televison & Video

Most Popular Question

battery pack swelled burst open

  • Televison & Video
Loading...