20 Most Recent Symphonic WV806 DVD Player/VCR - Page 2 Questions & Answers

check the mfg website

only if your set allows you to change regions. You can burn the CD and erase the region..otherwise NO!

My guess would be dirt on the rollers inside the VCR. They sesnse a jam and ejct. Try a VCR cleaner (with cleaning fluid) and see if that helps.

I have the same Symphonc DVD- VCR Combo wfr205. I can't get it to work either. I called Syphonic support 2 years ago about it, they told me to clean it. I did. It will recognize DVD's sparodicly, but will not finalize them so that I can play them on anything else. I tried 3 different brands of DVD-R all with the same results. I called Symphonic a 2nd time. They do not offer replacement and have never acknowledged the recoder has a problem. I finally bought a Sony DVD recorder. I can use it along with the VCR portion of the Symphonic. The Symphonic was a waste of cash.

check ebay.com
or mfg website

you need to take a Y-W-R wire set from the output of ur cable or sat set to the input of your dvd burner..

then just go on to the burner and click record.

ebay.com

or check the mfg website

i agree you should get a cleening disk if. that dosent work your gona haft to return the unit and get a better one

yea, your going to haft to reuturn the unit and get a new one. some times the lens messes up like that, sorry

check to make sure all the wires are going from the output to the input.

I have, from my mother's effects, a dvd and vcr combo but no instructions or manual can you help

make sure the tv is on channel 3, and the vcr also on channel 3 -if trying to record from cable or satalite. then make sure tape is rewound all the way. do a test by hitting record on vcr. let it record for a few minutes. rewind it, then just hit play. Dont change any channels until you are ready to record the program of choice. After this test. And recording is successful. Rewind the tape again. And change the channel to your choice. Hit record at time of or go into menu of your vcr and set up a time to record shows.

check your dvd that may not be a recordable dvd. You have to use either DVD R+, R-, or rewritable RW+/- disk. where did you buy it?

throw it out and buy some other brand

You may have already done this but I have run across VHS cassettes that a unit just wouldn't load and play. Try another cassette to see if it responds the same way.  

Expect to pay - this outfit is costly but they do have originals for most brands and models:
http://remotes.com/remotes/servlet/rs?o=c&a=Search&uid=0&m=+WF+803&uuid=12229892424950

I found this info.....it doesn't work for my model SV2000 ( WV806 ) , but it might for yours SV2000 ( WV10D6 )

With the recorder on stop, not on a menu screen. press on remote; CMSKIP-1-2-3. this will take you to a page labeled "F/W VERSION DISP" this will display the current firmware version and model numbers. To exit , press the "RETURN" button. DO NOT PRESS "OK" on remote , pressing "OK" will reset your player settings.

View disk manufacturer information:

with a disk inserted into recorder and stoped, not on a menu screen; press on remote CMSKIP-1-2-3 to go to firmware information screen.press the rigth arrow "->" once. this will display the disk media type and disk manufacturer ID. To exit, press the left arrow "<-" once to go to the firmware display screen, then press the "RETURN" button. DO NOT PRESS "OK" on remote , pressing "OK" will reset your player settings.

Ve al sitio comunidad de electronicos y checa los sitios interesantes ahi hay varias paginas con informacion que te pueden ayudar.Buena suerte.

hi

paragtm

search all over no luck yet will keep trying for you
in the mean time look here some good links that may help you out in the first few post .


riz.

hi just seen this post have you tried here

SYMPHONIC | SUPPORT


riz.