Top 20 ZEEPAD 7 inch Android 2.2 Tablet Questions & Answers

Hi code 43 can occur if the device driver fails uninstall the driver ,& install a new driver .cheers

Switch the tablet off. Then press the volume up button and keep it pressed while switching on the tablet. The tablet should stat in a special configuration mode. There will be a menu with the option to do a factory rest.

Go into your settings, system date & time. Ensure the Automatic date and time is checked, along with Automatic time zone. You can also make adjustments to time and date formats. Back out, and restart your tablet to see if this works. Date\time is a software function. Check to make sure you have the latest software version uploaded.

because it is the most important interface. When you leave the screen off, you also could leave the whole thing off. They still can't make cheap displays that does not use lots of power.

I would look in the settings and then time to change this option.

You need to factory reset! from off, press power and volume+ buttons together until reset screen comes up, then move using volume and select using power buttons!

both of my charging ports are bad , thats your problem also, we need to find a supplier for the parts so they can be fixed..

Did you do a factory reset? From off pressing power and volume + buttons together till reset screen comes up then select factory reset!

You might need to do a reset. With the power button off, hold the power button down without letting it go for about 10 seconds then the screen should show you how to do the rest to do a reset of the unit.

i have the same problem pleees help

Please try this: Tap on Apps in home screen - Settings - Storage - Internal Storage - Apps - Scroll down and Identify "Demo Video Application" under the apps list . Tap on Clear Cache and tab on "Disable", Ignore the warning message. Note: Cust may see the "Demo mode" icon in the homescreen, however it wont bringup Demo Video

I don't know we have demo on ours as well.

Read your manual...audio is mp3 format & video is mp4,3gp & avi.

It is different depending on which zeepad you have. From powered off, which yours sounds like it is: 1. Hold down both volumes and power at the same time. You should get an android on its back opened up. 2. Press both volumes at same time to open up a small blue text menu. 3. Then use Vol - and Vol + to navigate the Recovery mode. 4. Select "Factory Data Reset" 5. press power 6. choose "yes" from the menu 7. then press power again. If this does not work try holding down the volume and power at the same time.

You will be lucky to find any instructions for this tablet on line. I think these are imported directly from the supplier and onsold by the supermarket chains. But if you are after connection with PC, then you need a microUSB cable and hopefully once you connect to PC the PC software will recognize it and connect to the services. Try this link for some specification information and instructions on how to update the firmware on the tablet. Make sure you save your data on the PC before you update. http://zeepad.net/7.0.html

connect the both together using a lead should be provided and then go onto pic files and drag onto your pad file you want to save in if you have bluetooth on both devices you can connect with that but will be slower

here you find firmware and explanation how to setup the tablet: http://zeepad.net/7.0.html

I think this is what you are looking for: Google It For Me

how to fix tablet that is not reading an SD card

I solved the problem by returning it.