Frigidaire FGB24S5A Gas Single Oven - Answered Questions & Fixed issues
Oven gas
For safety purposes call gas technician to check your gas pipe. If stove turn off supposed not to smell gas.
9/5/2021 4:42:45 AM •
Frigidaire...
•
Answered
on Sep 05, 2021
•
1,268 views
Frigidaire error code f27 Ovens
Most error codes can be cleared just by unplugging the unit and re-plugging it back in. If this doesn't clear it then I would go to Frigidaire's web site and search for tech support. I did some checking with Frigidaire and they don't show a code f27 I was wondering if maybe it was showing two codes F2 and F7? so it might look like F2,7?
7/24/2021 3:14:22 PM •
Frigidaire...
•
Answered
on Jul 24, 2021
•
3,887 views
Oven element is sparking
you have a short and need to check it ASAP SHOULD BE ABLE TO VISUALLY INSPECT IT
the broil element
is the heating element that is found at the top of the oven and produces a very high heat for broiling. If the broil element isn't working, you should first do a visual inspection for signs that the element has blistered or separated. If the element appears normal then you can check for continuity with a multi-meter. Remove power from the appliance before performing this test. Remove the back panel and locate the terminals for the broil element and inspect the terminals and wires for signs of overheating or damage.
If there is no continuity then the element will need to be replaced. If the wires are damaged then they will need to be repaired. If the element is ok then you will need to check the broil circuit to determine the cause. This involves live voltage checks and should only be performed by qualified persons. Components to check include fuses, if the range is equipped, and oven control thermostat or electronic control.
The bake element
is the heating element that is found at the bottom of the oven. Most electric ovens use both the bake element and the broil element in a bake cycle, with the bake element performing 90% of the heating. If the bake element isn't working, the oven may not heat. To help determine if the bake element is defective you should first do a visual check. If the element is blistered or separated then it should be replaced. If the element appears to look normal, then turn the oven on to a bake function for a minute and then turn it off.
Check the element for signs of heating and if it is still cold then it may be defective. Disconnect the power and then remove the back panel. First check the wires as they may have become loose or corroded. If the element appears to be fine visually, test it for continuity with a multi-meter. ( by placing the each of the meter prongs on each end of the heater element connectors) If the element is burned or no longer has continuity, it will need to be replaced.
The oven safety valve
(also called the gas valve) is the part that ensures that gas is not released until the igniter has reached the correct temperature needed to ignite the gas. While this part can fail, it is uncommon. If the hot surface igniter does not glow you should first verify that you have voltage to the circuit. This is a live voltage check and should be performed by a qualified person. If voltage is lost at the valve terminals then you should verify the continuity of the bi-metal in the valve using a multi-meter.
4/17/2015 11:12:48 PM •
Frigidaire...
•
Answered
on Apr 17, 2015
•
80 views
Gas wall oven wont come up to temp.
GAS OVENS
1)The spark igniter tip is dirty (can clean it with either a little wire brush or a piece of fine sandpaper).
2) The Pilot flame is too low, and the tip of the igniter is not in the flame good enough. (the flame acts as a circuit when it touches the tip & completes the circuit).
3) The spark module is no good and needs to be replaced.(But 1 & 2 are your best bet).
spark module does not sense the flame when it's on. The spark igniter is also the flame sensor which provides feedback to the spark module.
Make sure the igniter is properly aligned with the burner lighting holes and it is clean. All lighting holes must be clean too. You can enlarge them using a drill bit one size bigger.
If it would not fix the problem, replace the bake burner and the igniter.
There is a small chance for the spark module itself to be bad as well.
ELECTRIC OVENS:
CHECK THE OVEN RELAY CONTROL BOARD Aclicking sound could be something wrong with a relay. Check for any loose connections around the main control board on your oven. The click you hear is a relay losing power and switching back on. If the clock resets then something is causing power interruptions to the board.
4/17/2015 11:04:59 PM •
Frigidaire...
•
Answered
on Apr 17, 2015
•
118 views
Frigidaire gas oven not working
when the power returned there would have been a high voltage which would have blown out the fuse cange the fuse and on it
12/6/2014 7:43:09 PM •
Frigidaire...
•
Answered
on Dec 06, 2014
•
646 views
F11 error code
Thank you for your post, Friend.
If you are receiving an error code F11 on your Frigidaire range, it typically indicates that your range has detected an issue with the runaway temperature (overheating). One of the best ways to determine if this is a false error code is to reset the power to the appliance by either unplugging it or flipping off the breaker for about ten minutes. If the error code persists, at this moment I would suggest connecting a professional to proceed further. Most likely the EOC (Electronic Oven Control) or RTD Probe (Resistance Temperature Detector) will need replacing. I hope this information helps to some degree. - Z
8/19/2014 7:23:42 PM •
Frigidaire...
•
Answered
on Aug 19, 2014
•
740 views
How can i get an owners manual?
Good Afternoon Friend, this is Z. I am happy to assist you!
I see that your question is listed under Frigidaire Gas Single Oven (FGB24S5A) and that you are looking for the manual. I have successfully located the Owner's Guide. However, if you need a different manual, please provide me your model number. You can typically locate the serial tag (which lists your model number) on the front of the oven, on the left side, as you open the door on a wall oven. If you have a range, you may find the tag in the storage drawer, on the right side. Hope this helps!
Frigidaire Manual Search Results
7/17/2014 5:27:26 PM •
Frigidaire...
•
Answered
on Jul 17, 2014
•
180 views
Why won't my oven let me set the temperature after a power failure?
Good Morning Annette,
I see that you are having trouble with setting the temperature of your oven on your range, model# FGB24S5A, after a power failure. I also see that you have reset your appliance by unplugging it and are receiving an error message of SAG or 5AB. I have looked into the model number that you have listed and it shows as a wall oven. I also do not show either of those error codes you have shown. If you can please get me the model number off your range, so I can better assist. The model number will either be right inside the oven on the back of the door or it may be located inside the bottom drawer. Looking forward to hearing from you.
WP
4/25/2014 3:56:08 PM •
Frigidaire...
•
Answered
on Apr 25, 2014
•
160 views
Cooking Time had Ended, Timer Tone stays on 3 second cannot hear it
This might come under a RECALL for this product. Consumer Protection Agency. If you are the original owner, they should have your registration. If not OO, contact Frigidaire at http://www.frigidaire.com/?medium=TSA&medium=tsa&refcd=GO20120517172252102477s_frigidaire_com&tsacr=GO29646139613&gclid=CPPH8ZDd_rwCFbQWMgod9GkAsA&gclsrc=aw.ds Please check your model number, I punched it in and it did not come up. This is the site to direct or talk to someone.
3/6/2014 8:21:05 PM •
Frigidaire...
•
Answered
on Mar 06, 2014
•
64 views
Oven ignitor
no.120 works both ways. did you wear gloves when installing. oil from hands can make if fry. remove leads and test for continuity. need to see 0. anything above that its bad.
11/11/2013 9:50:00 PM •
Frigidaire...
•
Answered
on Nov 11, 2013
•
51 views
Oven cleaning instructions
Look at the finish of the inside surface. If it looks dirty then it should be cleaned. You can use some foam products such as EasyOFF. Instructions are on the can. Follow them and don't breathe any of the fumes that propagate in the air. Keep a window open, just in case.
11/3/2013 8:55:09 PM •
Frigidaire...
•
Answered
on Nov 03, 2013
•
96 views
Oven will not work
Good Afternoon Sandra, thank you for your inquiry!
Let's try reprogramming your range by either unplugging it or
flipping the household circuit breaker off. Wait roughly ten minutes and then
turn the unit back on. An experienced service technician may need to further
evaluate this issue if it was not resolved with the power reset. Your appliance
could possibly be experiencing a potential wiring failure, faulty EOC
(electronic oven control), sensor probe and/or bake or broil element. I would
strongly recommend consulting a professional to narrow down the precise issue
before investing in parts that may or may not be the root cause.
10/31/2013 3:52:13 PM •
Frigidaire...
•
Answered
on Oct 31, 2013
•
147 views
The gas stove oven does not have a light can one
Hello Yvonne, thank you for your post!
It appears above-listed Frigidaire model number FGB24S5A has
a light inside the oven. Therefore the bulb may either be burnt out or the
switch may not be working properly. First, I would recommend replacing the bulb
with a new 40 watt appliance bulb (instructions can be found in the
Owner's Guide). If the issue persists, then I
am fairly confident that an authorized service agent will be able to restore
your appliance to its normal operating condition. You can often locate a
qualified service technician on the manufacturer website.
10/28/2013 4:43:52 PM •
Frigidaire...
•
Answered
on Oct 28, 2013
•
76 views
Not finding what you are looking for?