20 Most Recent Jenn-Air JDB9910 Dishwasher Questions & Answers

go to the maytag website and they should have a list of codes under troubleshooting if not call maytag repairs

POSSIBLY CONTROL BOARD BUT WE CAN NOT GUARENTEE IT SINCE WE CAN NOT DO THE TESTING NEEDED

The accumulator filter is below the spray arm radiant shield, guard and wash impeller and above the wash motor and pump. See part 7 on the diagram: https://www.partselect.com/Models/JDB2150AWP/Manufacturer/1/Sections/PUMP-AND-MOTOR/?ModelID=89671&ModelNum=JDB2150AWP&mfgModelNum=&ManufactureID=1&Selected=55866&Position=2&mfg=Maytag&Type=Washer&Mark=2 . There is also an over-pressure filter on the dishwasher feed tube. See part 2 here: https://www.partselect.com/Models/JDB2150AWP/Manufacturer/1/Sections/WATER-DISTRIBUTION-ASSEMBLY/?ModelID=262050&ModelNum=JDB2150AWP&mfgModelNum=&ManufactureID=1&Selected=55865&Position=6&mfg=Maytag&Type=Washer&Mark=6 . I hope this helps. Cindy Wells

Contacts in manual may also help. http://kitchen.manualsonline.com/manuals/mfg/jennair/dw860.html

Check the connection to the drain tailpiece from the dishwasher under the sink and make sure the clamp hasn't slipped off and is tight. Check the drain hose from the dishwasher and be sure it's not split or damaged. Check the drain spur on the drain tailpiece and see if it's corroded or leaking. Check the trap under the sink as well and make sure it's not leaking.