20 Most Recent Jenn-Air SCE30600 Slide-In Electric Kitchen Range - Page 5 Questions & Answers

https://www.searspartsdirect.com/partsdirect/user-manuals/JDR8895AAB-Jenn-air-Parts-JENNAIRCOOKING-manual http://kitchen.manualsonline.com/manuals/mfg/jennair/jdr8895aabsw_1.html

F0 is usually a stuck keypad button. Sometimes it's a problem with the wiring between the electronic oven control board and the keypad. With this model, it looks like the keypad and control board are sold as a single unit . See https://www.jennairreplacementparts.com/Shop-For-Parts/a13b103d563627/Model-JDS9860AAP-Jenn-Air-Range-Stove-Oven-Parts . You need the series 17 and later control board and timer, WP5760M302-60 . This part is roughly $400 from most vendors. https://www.partselect.com/Models/JDS9860AAP/Sections/CONTROL-PANEL-TOP-ASSEMBLY-AAP/?ModelID=91339&ModelNum=JDS9860AAP&mfgModelNum=&ManufactureID=1&Selected=53345&Position=3&mfg=Maytag&Type=Range&Mark=3 is another source. I hope this helps. Cindy Wells

if self clean works then sensor igniter did not need changing sounds like the control was changed to c top temp is around 550 f or 260 c check your manual on changing range c to f

slow lighting is not all that uncommon on these ranges. Make sure the burners are clean and that you can see the spark at each ignitor. If that is OK, check the gas pressure to the burners.

i would suggest having some one check out your your fuse box. they can wear out just like every thing else. the mounts fur the fuses get weak from heating up and cooling down. hope this helps.

I would the color grout that matches the counter and yes it is heat resisitant. and it cleans up with a spung. be sure to all extra grout off before it drys