20 Most Recent Jenn-Air 30 in. CCE3401 Electric Cooktop - Page 6 Questions & Answers

Yes replace motor

Generally there is a plug for the fan motor under the range, the panel where the drawer would be should lift off, you will then see the power to the fan motor. The fan motor is only 120Volts not 220V always unplug electricity before attempting to repair on any electrical appliance

one thing to be sure is there power to the range. if you can light the burner with a match your gas is good, If all burners are affected it can be a broken wire, power source, or spark module. always unplug electricity before attempting to repair on any electrical appliance

Dear Genie, Well, you are right in your surmising! That water has shorted out perhaps as many as several items. One way to solve this problem would be to wait until the water dries up, could take days or a couple of weeks. Another way would be to take a hair blow dryer and dry the parts by blowing them for a while, perhaps 10 to 20 minutes, but to see if that fixed it, you would need to turn it on, which could cause a short! No good. Best idea is to take it all apart and see if there is visible damage, and to take and electric meter and test it all. God bless your efforts.

I think the heating element is blown. A new element should fix it.

The link below shows the different parts for that unit. There is a button under the items that says watch video. http://www.appliancepartspros.com/search.aspx?model=cvg4380

you dont recoat need to replace the part

they will be frozen from one of the cleaning products you use and there probably not the 2 you use all the time. get some CRC or WD40 and spray a little on the shafts so that the lubricant can run down into the top of the gas valve. you might have some rubber covers at the base of the gas shaft that you might have to manipulate to get the lubricant into the gas taps. give them a couple of sprays at a couple of 1-2 hour intervals. then see if you can start to get the shafts moving by pushing and pulling on them. once they start moving get some more spray on them. should come good.

my blower switch shorted out. Could smell the plastic once removed. Liquids dripped into contacts during cleaning. Switch replacement obsolete. Found switch @ Ace. Made modifucation to panel to accept rectangular switch.