Top 20 Jenn-Air JGC8536 Gas Cooktop - Page 9 Questions & Answers

The burners may have shorted. A "reset" isn't going to fix it.

It depends on several factors. First, I'll assume when you "reset" the range, you are resetting the circuit breaker (cb) in the cb panel. If this is the case then there are two possible causes. 1. The cb is old and worn out. So replace it. 2. There is an occasional overload of the circuit. This causes the cb to trip. For that you will need a qualified electrician to determine what is causing the overload. WARNING!!! Ranges are typically 220 Volts which can kill a person. So leave this up to the pros. Do Not attempt to do this work yourself.

GOOGLE KNOWS check link below https://www.google.com/search?q=Omega+ceramic+cooktop+error+code+F&oq=Omega+ceramic+cooktop+error+code+F&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

Probably a defective capacitor on the main board. Trace and replace.

Try this

• Error code E01 showing on display
• What causes an E01 error code on the CT Electric Cooktop control panel?
• CT E01

STEPS TO VERIFY ISSUE:

Turn the home circuit breaker to the unit off for 30 seconds then back on again. Then retest the unit operation.Or contact the maker direct. They are expensive units and in my experience, if you get 2 years out of them in a commercial setting, you are lucky!

INDUCTION COOKERS - Omcan

omcan.com > ... > INDUCTION COOKERS

INDUCTION COOKERS. Home FOOD EQUIPMENTCOOKING EQUIPMENTINDUCTION COOKERS. Name, Date, Price (ASC), Price (DESC), Item Number.

The controls are not working anymore and will have to be replaced.

A quick gargle turned up this; https://www.google.com/search?client=firefox-b-d&q=hotpoint+induction+hob+replacement+glass

has your supply voltage dropped below 140V ?

WD40 is a Water Displacement (formula 40) spray. You do not need to displace water. Also when it fully dries, it leaves a waxy film to further shed WATER. People use it for everything, it smalls nice, but it was made for one thing only. Electric or gas cooktop? Gas have a safety feature, push in and turn, some have an electric lock. Just sticky, or corroded, use Plus Gas, or some type of penetrating oil. Did they work before or is this cook top new to you? Did you read the instructions?

Look for a defective capacitor on the circuit board, like on the picture. The top is somewhat curved or even open. Replace the cap and the ones that are the same. most likely they are from the same batch and will be defect in a few weeks or so. Look at the green capacitors. the top left was blown in my hub. I could not upload a picture, because I can't switch of my add blocker

Try google.

https://www.repairclinic.com/ProductDetail/86861?gclid=EAIaIQobChMItv6Nr5nw7AIVqQiICR0-EQn9EAAYAiAAEgIO9_D_BwE

FIXYA CAN NOT HELP YOU

Sorry I am unable to comment on your specific problem, I just wanted to remark that it is the usual practice with bought-in parts whereas those parts manufactured in-house tend to be more reasonably priced. Often it seems the price of bought-in parts double as soon as they arrive and then repackaging cost is added and then a notional amount of extra profit added for good measure... Sometimes, when a component bears the name or the logo of the original manufacturer, it is possible to source replacements from that company resulting in a considerable saving. Several times I have managed to do this and once the saving was an incredible amount. The appliance manufacturer wanted £65 plus carriage and tax but the component manufacturer sold me the part for a total cost of £16.60.

Contact F&P or an appliance parts supplier to learn part number and availability.

Broken! Disconnect and call professional to fix or replace!

My cooktek model MCD 3500 showing error -CAL on display can you solve plz

Spark box faulty

You only need 1

see pics hope it helps