20 Most Recent U-Line Icemaker - Page 7 Questions & Answers

Change the water inlet valve if it is off and water continues to bypass the valve when off...Sea BreezeU-Line Refrigerator PartsWater Inlet Valve 2552A

Is the condenser fan running? Is the condenser clean? (condenser is the "radiator like" coil outside of the ice box. It cools the hot refrigerant.

This unit work on the thermostat. When the temperature gets between 10 - 15 degrees it will satisfy the control then turn the compressor off and icemaker will advance. If the control is set too cold then it will never satisfy the control. 1st make sure the thermostat is at the warmest setting. When the compressor cycles off look to see if the icemaker is advancing.If no then replace the control.

Hi
Not all U-lines have alumalastic under their icemaker. What model do you have? Alumalastic will come with the icemaker with directions on how to put it on. It's a caulking material that is spread under the icemaker to cover the heater and sensor tube. If you remove your icemaker you should see it if it needs it.

HI.KATHY.if u got enough water then it must be the ice thermostat cutting out too early.hope this helps ali

Your water valve may hay a drip like a faucet. Causing the spout to freeze up. If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

This happens when the motor is running slow or the water switch is sticking. To take care of both things you need to replace the faceplate on the icemaker.