20 Most Recent Franke Evolution - Page 2 Questions & Answers

Have you turned off the water supply for the descale?Bean to cup cleaning

Hi,I hope this is the one you are looking for. http://www.xpresscoffeeuk.co.uk/pdf/evolution_plus_manual.pdf

Hi,Before you go ahead to check the flowmeter, make sure that the water pressure is OK.I had the same problem with mine, it is normal for that message to come up if the boiler is empty, but has to go away once the machine stops taking water or filling the coffee boiler.

E43 error motortime out refers to the brew unit not being "sensed" by the micro switch, the most common fault is the micro switch failing. other causes are the failure of the brewmotor itself, or bushes within the brewer. The micro switch is simple to replace as its obvious withits location. the other however will require the expertise of an engineer.

Hi. I think it a pump problem. You would have to take the panels off and check the pump. The evolution may have two pumps, so swapping the terminals on the pump may help you in findingthe fault. Dazza REPAIRER

the evolution is a super automatic ,im not sure what you mean by water processed? but i do know you need water with a low ppm of hardness or you risk ruining the machine. water processed refers to the way beans are prepared, usually decaf.