LG RH177 DVD Recorder/HDD Recorder - Page 9 - Answered Questions & Fixed issues


Open internal fuse or power supply failure

LG Televison &... | Answered on Aug 21, 2019 | 28 views


. not enough information to suggest a fix.

LG Televison &... | Answered on Aug 21, 2019 | 88 views


if all you got when you did the auto setup was 18 channels, that is because that's all the channels that your tuner could pick up in your area. There is no additional settings you can make or changes that will give you additional programs without an improved antenna system. Without knowing what kind of antenna you have there's no way to suggest an improvement.

LG Televison &... | Answered on Aug 21, 2019 | 24 views


You should have manual buttons on the tv itself to control input and volume. It appears it is defaulting to antenna channel 3 and low volume when first powered on. You can buy universal remotes to control your set.

LG Televison &... | Answered on Aug 18, 2019 | 93 views


Go into the tellys setup menu and select update channels then go to auto and it will find all the local stations.

LG Televison &... | Answered on Aug 18, 2019 | 28 views


turn it off manually on the telly or at the wall switch. Get yer self a universal remote from walmart for around $5.

LG Televison &... | Answered on Aug 18, 2019 | 19 views


You have fallen into the 'let's see if this fixes it' form of television repair. The course to become an engineer is 2 years. You need to be able to correctly diagnose boards at component level. It is far cheaper to take the television to a service technician and correctly diagnose the problem and replace the correct single part that failed. The other very real problem is that you have no way of knowing that the 'guaranteed parts' that you bought was actually working? Did you notice that is says 'no refund, no return'? Did you know that most of the boards come out of failed sets? Only techs can return faulty boards and they will tell the supplier why that board they sold is faulty.

LG Televison &... | Answered on Aug 15, 2019 | 22 views


a circuit has been blown and needs to be replaced

LG Televison &... | Answered on Aug 15, 2019 | 66 views


Do you mean that the closed captions are on? Disabling this depends on the video source. If the source is TV (OTA or cable with a coaxial cable), then you need to access the Settings icon after pressing the Home button on the remote. Then go to the Accessibility section. Locate the Closed Caption sub-menu and disable the captions. (Click the appropriate button on the remote to enter menus and change settings.)

If the source is not connected to the RF input, then you probably need to disable the captions at the source. This will depend on the source. For some satellite boxes with a main set-top box that serves a secondary TV, you'll need to disable the captions at the main set-top box. For an ADB IPTV box, press Menu on the remote. Then go to Settings with the arrow keys and press Enter. You may need a pass code from the service provider. Go to the Hardware sub-menu and enter the Audio section. Finally the captions can be disabled in this section. Check the documentation for your source.

If you mean the Voice Narration (audio description), you need to go to the Audio settings section from the Home screen or the Accessibility section (as above) depending on the TV model.

I hope this helps.

Cindy Wells

LG Televison &... | Answered on Aug 14, 2019 | 34 views


https://www.lg.com/us/support-product/lg-55LB6100

LG Televison &... | Answered on Jul 21, 2019 | 2,868 views


You need to re program the remote to factory default. by taking out the batteries, and waiting 12 hours (to blank the eeprom on the device ) Then it reset itself back to factory default. When the batteries are put back in.

LG Televison &... | Answered on Jul 12, 2019 | 26 views


Turn the auto tuning off, and manually tune in all the channels you know that you get.

LG Televison &... | Answered on Jul 11, 2019 | 109 views


That sounds like a T-com board issue, replace it.

LG Televison &... | Answered on Jul 12, 2019 | 56 views


Those blinks are error codes. Count the number of blinks and go on line with the make and model no. of the TV and number of blinks. For example (Sony Trinitron 46xxxxxxx 4 flash error code ). This will tell you whats wrong with the TV.

LG Televison &... | Answered on Jul 11, 2019 | 27 views

Not finding what you are looking for?
LG RH177 DVD Recorder/HDD Recorder Logo

248 questions posted

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...