Top 20 Labtec Microphone Microphone Questions & Answers

This type of audio feedback loop can happen on any mic if you are playing back audio at a loud volume on speakers that are close to the mic while the mic is on - which tends to happen on Skype calls. Try lowering your speaker volume or using headphones to hear the audio, then speak into mic, and the feedback should be reduced.

• Have you opened your C- media mixer to make sure the mic input is not muted and make sure the volume level is up? You can go to advanced controls and select it as the displayed unit if it is not initially displayed. This link can get you to your download should you need it. http://labtec.custhelp.com/app/answers/list

Regards, Tony

In addition to the instructions below you may need to make sure you have selected the right sound source (normally WAVE) in your recording program

Using a microphone with computer

To use any microphone with your computer you will need to enable it in control panel. The following instructions are for Windows XP but are broadly similar for Vista and Win7

Click START, CONTROL PANEL, SOUNDS & AUDIO DEVICES

Click VOICE

In Sounds & Audio Devices Properties window locate SOUND PLAYBACK box. Click the VOLUME button. Make sure that there is not a check-mark in the MUTE box against microphone in the list of devices and that the volume slider is at the top of the scale.

Make sure the MUTE ALL box isn't checked before closing the window.

Now click the VOLUME button in the SOUND RECORDING BOX. Here SELECT microphone as an input source for recording (as opposed to un-checking mute in the playback controls).

NOTE if your microphone is not listed in the 2 sets of volume controls click OPTIONS, PROPERTIES on the tool-bar and place a check against microphone in the list entitled 'show the following volume controls' and then click OK. Same applies for Internal mic.

That should be it.

To adjust audio volume generally.

Under VOLUME tab adjust Device Volume as necessary. Also (under Loudpeaker Settings) click Speaker Volume and adjust slider to suit.

You might put a check mark in the box to show the volume control on the Task Bar so you can go straight to it to make adjustments in the future.

Go to your sound preferences and find "Output Audio" and set it to whatever option you like.

Using a microphone with computer

To use any microphone with your computer you will need to enable it in control panel. The following instructions are for Windows XP but are broadly similar for Vista and Win7

Click START, CONTROL PANEL, SOUNDS & AUDIO DEVICES

Click VOICE

In Sounds & Audio Devices Properties window locate SOUND PLAYBACK box. Click the VOLUME button. Make sure that there is not a check-mark in the MUTE box against microphone in the list of devices and that the volume slider is at the top of the scale.

Make sure the MUTE ALL box isn't checked before closing the window.

Now click the VOLUME button in the SOUND RECORDING BOX. Here SELECT microphone as an input source for recording (as opposed to un-checking mute in the playback controls).

NOTE if your microphone is not listed in the 2 sets of volume controls click OPTIONS, PROPERTIES on the tool-bar and place a check against microphone in the list entitled 'show the following volume controls' and then click OK.

That should be it.

To adjust audio volume generally.

Under VOLUME tab adjust Device Volume as necessary. Also (under Loudpeaker Settings) click Speaker Volume and adjust slider to suit.

You might put a check mark in the box to show the volume control on the Task Bar so you can go straight to it to make adjustments in the future.

as long as there is a "mic" plug on the PC then yes it will.

Check the Device Manager to see if it is discovered and connected with drivers installed. Otherwise, install the disk that came with the microphone to install the drivers. If it didn't come with the disk, reboot your computer with the microphone connected to the computer - upon boot, the computer should prompt and let you know a new device has been found and will install the drivers automatically.

try to adjust the line in volume when you double click the volume icon, it may be muted

If you are using skype, go to the upper left hand top and click on call. Then click on audio settings and make sure your microphone is listed as the mike to use in the window of the drop down menu. It should say logitech something in the window that says microphone.

Just plug it into the mic input on the sound card. All recent operating systems support it by default.

i had the same problem it's because your plugging it into the front of your computer....plug it in the back and it should work....there should be something that pops up or click in the right hand corner there's an icon that says sound afftect....you need to acknoledge that it's a mic not a cam that your plugging in

Batteries or a mains adapter. https://www.google.com/search?q=LABTEC+ICS+150 ..

why not photo the IC, and show that. for 10x better answers. not told what car is came out of or what the OBJECT did. (PCM/ECU/BCM ,etc?) <<< vast on cars/trucks\ many PCB or Modules the ICs are some or all , contract parts and the number on top is secret contract Part number. ahhhhhh it is not a CAR at all it is LABTEC LCS-1024 AMPLIFIED COMPUTER SPEAKERS moving you now to computers stuff

If you are looking for the top security companies in London that provides its customer with remarkable security services. Check out this site for security services https://www.urbansecurityguards.co.uk

TRY THIS LINK: labtec lcs 2424 9 PIN pinout Google Search or I HOPE this is JUST WHAT YOU NEED! Anthony

hi. not sure if this link will help you out but have a look. Skype keeps on saying that my voice input is too low Google Search

I would use system restore to put the lost stuff back onto your computer. Then if it puts back the unwanted software be more careful about removing it.

Hi they will work on windows 10 u will have to search for a driver if one driver doesn't work search for one that works .cheers

not sure if this link will help you out. https://www.google.co.uk/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=Labtec+1060+speakers+manual

Who? What?