20 Most Recent
Gaggia Syncrony Compact Digital Espresso Machine - Page 7 Questions & Answers
What does the red light descaling prompt light stay on? how can i know i have everything possible?
Hi,
Fill it up the tank with descaler and start the machine on descaling. Leave it to trow all the liquid and must finish to the bottom,leave the machine to get AIR when descaler finished.Then the machine will stop and will tell you to put fresh water to clean . Fill the water tank to the MAX level and continue with the program. When the water is on minimum ,machine will stop,and the descaling process must be finished.
Good luck
Help....my gaggia titanium is stuck in rinse mode. What can I do to repair this issue?
you will no doubt find that the programmer has a very small drive motor on the controller module that has burnt out the only way to fix it is to find an engineer to replace the little drive motor on the controller or replace the controller unit completely or just advance the controller one step every time it gets to that stage if possible I hope that helps eric
Netherlands
Hi There,
That sounds like your coffee grind or tamping needs to be adjusted or the shower screen may need cleaning.
Pressurised water looks for the weakest point when extracting and if grind is too coarse or tamp is off, it will come out one side mainly.
If you don't have a grinder add extra coffee in the portafilter basket.
If is still spurts with the portafilter off - the shower screen may need cleaning - take it off and soak in coffee cleaning solution.
Puly Caff coffee cleaner
Not finding what you are looking for?